辊道-圣霖国际【用心服务】-辊道价格

空转辊道——通常借助轧件重力来推动，辊道价格，所以辊道之平面多做成与水平面之间有斜度，以利用重力作用，因此又称为重力辊道。一般小型轧机的辊道，特别是升降台上的辊道，尽可采用重力辊道而不必采用转动辊道。有些工作辊道的延长部分也有采用重力辊道的。

The idle roller table is usually driven by the gr**ity of the rolled piece， so the plane of the roller table is made of a gradient between the horizontal plane and the horizontal plane， so as to make use of the gr**ity effect， so it is also called the gr**ity roller table. The rolling mill of a **all mill， especially the roller table on the lift table， can use the gr**ity roller without using the rotating roller table. Some of the lengthening parts of the working rollers also use the gr**itational roller.

对于大型轧机来说，辊道生产商，尤其是热轧机必须用动力传动辊道。多的还是集体传动式，特别是长度不大而轧件断面很大时，适宜用集体传动。单独传动辊道通常用于长距离的轧件的传送。

For large rolling mills， in particular， the hot rolling mill must be powered by a power drive roller. The most important is the collective tran**ission type， especially when the length is **all and the section of the workpiece is very large，辊道， it is suitable for the use of collective tran**ission. The single drive roller is usually used for the tran**ission of long distance parts.

辊道是轧钢车间运送轧件的主要设备，辊道厂家，其重量占整个轧钢车间设备总重量的40%左右，是轧钢车间中使用多的设备。轧件进出加热炉，在轧机上往复轧制及轧后输送到精整工序等工作均由辊道来完成。

Roller table is the main equipment for rolling parts in rolling workshop. Its weight accounts for about 40% of the total weight of the whole rolling workshop. It is the most used equipment in rolling workshop. Rolling in and out of the heating furnace， the rolling mill on the rolling mill and after rolling to the finishing process and other work are completed by the roller.