切向键联接：它由两个普通楔键组成。其上下两面（窄面）为工作面，其中之一面在通过轴心线的平面内。工作面上的压力沿轴的切线方向作用，能传递很大的转矩。
Tangent key join: it cists of two common wedges. Both sides of the upper and lower sides (narrow surface) are working faces，联接机产品， one of which is in the plane of the axis of the axis. The pressure on the working face acts along the direction of the shaft and tran**it a large torque.
我们聊聊在机械设计中，我们必须掌握的有关轴毂联接的知识！轴毂联接是轴毂与轴相连接的轴上零件，常见齿轮、带轮等。联接使回转零件在轴上**和固定，以便传递运动和动力。
We talk about the mechanical design， we must master the knowledge about the shaft hub connection. Shaft hub connection is the axle hub and shaft connected to the shaft parts，联接机厂家联系方式， common gear， belt wheel，联接机， and so on. The connection enables the rotating parts to be and fixed on the axis to tran**it motion and power.
装夹过程及工作原理。钳台底座在设备工作台上固定好后，先调整可调钳口座在钳体底座上的位置，确保装夹行程内能有效对工件进行装夹；再将待加工产品置于柔性虎钳的两个钳口之间。
Clamping process and working principle. When the clamping platform is fixed on the equipment worktable，联接机生产， the of the adjustable jaw seat on the base of the clamp body is adjusted first， so as to ensure that the workpiece can be clamped effectively in the clamping stroke， and then the processed product is placed between the two jaw openings of the flexible vice.
联接机生产-联接机-圣霖国际【开拓创新】由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司坚持“以人为本”的企业理念，拥有一支技术过硬的员工**，力求提供更好的产品和服务回馈社会，并欢迎广大新老客户光临惠顾，真诚合作、共创美好未来。圣霖国际——您可信赖的朋友，公司地址：辽宁省鞍山市高新区越岭路256号（研发中心A座2号楼510室至511室），联系人：王秋。