与平键联接比较，联接机生产，花键联接在强度、工艺和使用方面有下列特点：在轴上与毂孔上直接而均匀地制出较多的齿与槽，故联接受力较为均匀；因槽较浅，齿根处应力集中较小，轴与毂的强度削弱较少。
Compared with the flat bond connection，联接机哪里有， the spline connection has the following characteristics in strength， process and use.More teeth and grooves are made directly and evenly on the shaft and hub hole， so the joint force is more uniform.
Because of the shallow groove， the stress at the root of the tooth is **all， and the strength of the shaft and hub is weakened less.
键是一种标准件，通常用于联接轴与轴上旋转零件与摆动零件，起周向固定零件的作用以传递旋转运动和扭矩，楔键还可以起单向轴向固定零件。而导键、滑键、花键还可用作轴上移动的导向装置。 根据键的结构形式，键联接可分为平键联接、半圆键联接、楔键联接和切向键联接等几类。
The key is a standard part， which is usually used to connect the rotating parts and swing parts of the shaft and the axle to move the fixed parts to tran**it rotary motion and torque， and the wedge key can also play a one-way axial fixation part. The guide， slippery key and the spline can also be used as a guiding device for moving on the axis. According to the structure of the key， key joins can be divided into a flat bond，联接机， a semicircle bond， a wedge bond and a tangent bond.
我们聊聊在机械设计中，我们必须掌握的有关轴毂联接的知识！轴毂联接是轴毂与轴相连接的轴上零件，常见齿轮、带轮等。联接使回转零件在轴上**和固定，以便传递运动和动力。
We talk about the mechanical design， we must master the knowledge about the shaft hub connection. Shaft hub connection is the axle hub and shaft connected to the shaft parts， common gear， belt wheel， and so on. The connection enables the rotating parts to be and fixed on the axis to tran**it motion and power.
联接机厂家电话-圣霖国际(在线咨询)-联接机由鞍山市圣霖进出口贸易有限公司提供。联接机厂家电话-圣霖国际(在线咨询)-联接机是鞍山市圣霖进出口贸易有限公司升级推出的，以上图片和信息仅供参考，如了解详情,请您拨打本页面或图片上的联系电话，业务联系人：王秋。