联接机-联接机谁家好-圣霖国际(推荐商家)

矩形花键联接是应用为广泛的花键联接。 应用广泛。如航空发动机、汽车、燃气轮机、机床、工程机械、拖拉机、农业机械及一般机械传动装置等等。渐开线花键的齿廓为渐开线，分度圆压力角α有30°及45°两种。齿顶高分别为0.5m和0.4m(m为模数)。

The rectangular spline connection is the most widely used spline connection. It is widely used. Such as aero engine， automobile，联接机谁家好， gas turbine，联接机产品， machine tool， engineering machinery， tractor， agricultural machinery and general mechanical tran**ission equipment and so on. The tooth profile of the involute spline is involute， and the pressure angle of the dividing circle is 30 and 45 degrees. The top of the tooth is 0.5m and 0.4m respectively (M is the modulus).

凡是在轴毂联接中不用键、花键或销时的联接，统称为无键联接。无键联接中我们介绍两个常用的型面联接和过盈配合联接。

The connection of no key， spline or pin in the hub connection is called the keyless connection. In keyless joins， we two commonly used type face joins and interference fit connecti.

型面联接：是利用非圆剖面的轴与相应形状的零件的毂孔配合而构成的联接，作为机械传动中的联接方式，型面联接相对于传统的键联接相比，联接机型号，具有联接强度高，没有应力集中，可以传递大扭矩且的同时也可以承受冲击载荷，并且对于一些大型机械装备来讲其拆装方便及维修便利。

is the hub hole type surface connection: the non-circular section axis and the corresponding shape parts with a connection，联接机， as the connection mode in mechanical tran**ission， compared with the traditional linkage type surface connection compared with connecting strength， no stress ， can  large torque and high efficiency at the same time it can withstand the impact load， and for some large mechanical equipment for its disassembly and convenient maintenance.