辊道-圣霖国际【客户至上】-辊道设备

辊道是轧钢车间运送轧件的主要设备，辊道设备，其重量占整个轧钢车间设备总重量的40%左右，是轧钢车间中使用多的设备。轧件进出加热炉，在轧机上往复轧制及轧后输送到精整工序等工作均由辊道来完成。

Roller table is the main equipment for rolling parts in rolling workshop. Its weight accounts for about 40% of the total weight of the whole rolling workshop. It is the most used equipment in rolling workshop. Rolling in and out of the heating furnace， the rolling mill on the rolling mill and after rolling to the finishing process and other work are completed by the roller.

包胶滚筒安装方便

包胶滚筒安装起来特别的方便，不需要安装好在送过去，现场进行安装就可以了，滚筒也是不需要拆卸的，这样是非常方便的，圣霖国际辊道，你只需要付钱、收获、等着用就可以了，其他的都有**的人士来干。

Easy installation of rubber drum

Package rubber drum installation is especially convenient， do not need to install in the past， the site can be installed， the cylinder is not required to be disassembled， so it is very convenient， you only need to pay， harvest， and other use， and other professional people to do.

单独传动辊道为一个电机带动一个辊子。这种辊道结构简单，操纵灵活，维修方便。根据铸坯的断面尺寸计算选择辊子直径和辊身长度，切割区后的辊道辊间距取决于定尺长度。切割前辊道速度与拉坯速度一致，切割后要迅速输送铸坯，辊道生产商，辊道速度一般为20～30m/min。

A single drive roller is used as a motor to drive a roller. The roller table is simple in structure， flexible in operation and convenient in maintenance. According to the section size of the slab，辊道， the diameter of the roller and the length of the roller are calculated. The roller spacing after the cutting area depends on the length of the length. Before cutting roller speed and casting speed， after cutting to quickly transfer slab， roller speed is 20 ~ 30m/min.