N1922A
Agilent N1922A P系列宽带功率传感器，50 MHz至40 GHz
Agilent N1922A P系列宽带功率传感器可提供峰值、峰均比、平均功率、上升时间、下降时间、大功率值、小功率值以及宽带信号的统计数据。
主要特性与技术指标
·当连接到被测件时进行调零和校准
·-35 dBm至+20 dBm的宽动态范围，适用于峰值功率测量
·校准因数、线性、温度及带宽修正数据均存储在EEPROM（电子擦除式可编程只读存储器）上
·标配的2.4mm连接器
·固定在传感器上的电缆电缆长度为1.5m（5ft）、3m（10ft）和10m（31ft）
Agilent N1922A
Agilent/HP N1922A P-Series Wideband Power Sensor, 50 MHz to 40 GHz
The N192XA sensors are the first to provide internal zero and calibration by integrating a DC reference source and switching circuits into the power sensor. This feature eliminates the multiple connectiassociated with using an external calibration ource, thus inimizing connector wear, test-time and measurement uncertainty.
Features:
· Zero and calibrate while connected to the DUT
· -35 dBm to +20 dBm wide dynamic range for peak power measurements
· Calibration factors, linearity, temperature and bandwidth correction data stored in EEPROM
· Precision 2.4mm connector as standa
· Sensor cable fixed to sensor. ailable cable lengths are 1.5m (5ft), 3m (10ft) and 10m (31ft)