ppr水管打压试验
在ppr水管的水路改造好后，一定要做好打压试验。有机会需自己在现场，ppr管品牌，并且实际观察压力是否下降，我们可以在接头处裹上报纸，有漏水可以轻松发现。不要等着水泥都铺上了，才去打压试水。
Pressure test of PPR water pipeAfter the transformation of PPR water pipe，ppr管规格， the pressure test must be done well. If there is an opportunity， we need to be actually observe whether the pressure drops. We can wrap a newspaper around the joint and easily find the leakage. Don"t wait for the cement to be laid before you test the water.
ppr管在电气部分：
部分开关、插座被后续的给、排水管道、厨卫风道等掩盖，所以施工前必须结合土建预留预埋，考虑到位。
室内强、弱电插座盒位置不合理，强电盒距弱电盒距离太近，一般要求为20cm，特别是卧室的插座，后期业主装修时插座被衣柜、床遮住，造成业主不满意。
PPR tube in the electrical part:
Some switches and sockets are covered by subsequent water supply and drainage pipes， kitchen and bathroom air ducts， so they must be reserved and embedded in combination with civil engineering.
The location of the indoor strong and weak current socket box is unreasonable. The distance between the strong and weak current boxes is too close. Generally，嘉兴ppr管， it is required to be 20cm， especially for the socket in the bedroom. The socket is covered by the wardrobe and bed during the later decoration of the owner， causing the owner dissatisfaction.
ppr管热熔操作
热熔器接通电源，到达温度指示灯亮后方能开始操作。
切割管材必须使端面垂直于管轴线，管材切割一般使用管子剪，如为大管径，则用锯条切割，切割后断面去毛刺和毛边。
Hot melt operation of PPR pipe
The heat melt can be operated after the power is turned on and the temperature indicator light is on.
The end face of the pipe must be perpendicular to the pipe axis. Pipe cutting is generally used. If the pipe diameter is large， it is cut with a saw blade. After cutting， the sected shall be deburring and burr free.
ppr管品牌-嘉兴ppr管-Gafloon由台州艾菲力塑胶有限公司提供。台州艾菲力塑胶有限公司实力不俗，信誉可靠，在浙江 台州 的塑料管等行业积累了大批忠诚的客户。艾菲力塑胶带着精益求精的工作态度和不断的完善创新理念和您携手步入辉煌，共创美好未来！同时本公司还是从事PPR管，地暖管，PVC管的厂家，欢迎来电咨询。