ppr管件-卡弗龙-ppr管件批发

PPR管格与管件连接端面必须清洁、干燥、无油。

用卡尺和合适的笔在管端测量并标绘出热熔深度，热熔深度应符合下表规定：

熔接弯头或三通时，按设计图纸要求应注意其方向，ppr管件价格，在管件和管材的直线方向上，用辅助标志标出其位置。

The connecting end face of PPR pipe lattice and pipe fittings must be clean， dry and oil-free.

Measure and plot the hot melt profundity at the pipe end with a caliper and a suitable pen. The hot melt profundity shall meet the requirements of the following table:

When welding elbows or tees， the direction could be noted according to the requirements of design drawings， and the place shall be marked with auxiliary marks in the straight direction of pipe fittings and pipes.

    PPR管和PVC管的区别可以以管径的粗细为依据，但是这种鉴别的要领就必要经历了。首先对管子的环境都要熟习，ppr管件品牌，少要有印象。这样的话时间长了看到管子就知道其规格是多大的了。

The difference between PPR pipe and PVC pipe can be based on the thickness of pipe diameter， but the essentials of this identification must be experienced. First of all， we should be familiar with the environment of the pipe， and h***e less impression. In this way，ppr管件批发， after a long time， you can see the size of the pipe.

冷热水管不要同槽

水路改造时，冷热水管要不要同槽，而且两者之间距离保持10cm以上。如果热水管紧挨冷水管，会降低热水管的保温性，热水很快就会变冷。这里还要提醒大家，水管开槽较深，要避免开开横槽，横槽会***墙体结构。

Hot and cold water pipes should not be in the same tank

In waterway rectruction， whether the cold and hot water pipes should be in the same groove， and the distance between them should be kept at least 10 cm. If the hot water pipe is close to the cold water pipe，ppr管件， the heat preservation of the hot water pipe will be reduced， and the hot water will soon become cold. Here also reminds everybody， the water pipe groove is deep， must ***oid to open the transverse groove， the transverse groove will destroy the wall structure.

ppr管件-卡弗龙-ppr管件批发由台州艾菲力塑胶有限公司提供。ppr管件-卡弗龙-ppr管件批发是台州艾菲力塑胶有限公司今年新升级推出的，以上图片仅供参考，请您拨打本页面或图片上的联系电话，索取联系人：郑总（Rainy）。同时本公司还是从事PPR管，地暖管，PVC管的厂家，欢迎来电咨询。