Uk Gafloon Pipe Group Ltd 提醒您水电安装预埋管线注意事项给排水部分
·外墙雨水管、空调冷凝水管预留洞时要考虑外墙保温的厚度，避免二次修洞。
·室内排污管的标高比设计标高可以高出5-10cm，这样可避免室外排水管网的坡度太小 。
Uk Gafloon Pipe Group Ltd reminds you for water and electricity installation and water supply and drainage
·The thickness of external wall insulation chould be regarded when reserving holes for external wall rainwater pipe and air conditioning condensate pipe to ***oid secondary hole repair.
·The elevation of indoor sewage pipe can be 5-10cm higher than the design elevation， as to ***oid too ***all slope of outdoor drainage pipe network.
PPR管格与管件连接端面必须清洁、干燥、无油。
用卡尺和合适的笔在管端测量并标绘出热熔深度，热熔深度应符合下表规定：
熔接弯头或三通时，ppr阀门管件，按设计图纸要求应注意其方向，在管件和管材的直线方向上，用辅助标志标出其位置。
The connecting end face of PPR pipe lattice and pipe fittings must be clean， dry and oil-free.
Measure and plot the hot melt profundity at the pipe end with a caliper and a suitable pen. The hot melt profundity shall meet the requirements of the following table:
When welding elbows or tees， the direction could be noted according to the requirements of design drawings， and the place shall be marked with auxiliary marks in the straight direction of pipe fittings and pipes.
水路和电路不要同槽，普陀区ppr管件，如果发生漏水，或者产生冷凝水时，ppr管件品牌，容易浸泡到电线，ppr管件批发，这是非常***的，好相距10cm以上。如果有水电交叉的时候，水下电上。
Different hydropower tanks
Water circuit and circuit should not be the same as the groove. If water leakage or condensate water is produced， it is easy to soak into the wire. This"s very dangerous， and it is better to be more than 10cm apart. If there is a water and electricity crossing， the underwater power is on.
卡弗龙(图)-ppr管件批发-普陀区ppr管件由台州艾菲力塑胶有限公司提供。台州艾菲力塑胶有限公司为客户提供“塑料制品（不含塑料桶）,橡胶制品（不含橡胶桶）,阀门”等业务，公司拥有“Gafloon卡弗龙”等品牌，专注于塑料管等行业。，在浙江省台州市三门县西区开发区的名声不错。欢迎来电垂询，联系人：郑总（Rainy）。同时本公司还是从事PPR管，地暖管，PVC管的厂家，欢迎来电咨询。