现货密炼机造粒机7-本溪现货密炼机造粒机-昶丰机械

本机主要用于橡胶、塑胶及化工原料的混合密炼，也适用于各种高、低粘度物料的混炼。本机控温、分散均匀、简单实用，适合实验室的配方研发。

相关参数

1. 有效容量：1L

2. 温度范围：RT~260℃

3. 加热方式：电热管

4. 加热功率：2.4KW

5. 控 制 器：LED数字显示器，按键设定输入，现货密炼机造粒机4，数字显示输出

6. 硫化计时：LED数字显示器，现货密炼机造粒机7，0.1S~99M~9.9H密炼时间可以设置

7. 倒料方式：电机翻转倒料

8. 翻转角度：110°

9. 转子形状：M-W加压式与浇铸混合槽

10. 转子材质：38CrMoALA氮化  处理，硬度HRC60表面硬铬

11. 转子轴心深度：0.6-0.75MM，本溪现货密炼机造粒机，脆性不大于11级

1. 密炼室为“W"形，采用“M”形下加压盖，形成全封闭混炼空间。搅叶采用棱形螺旋无死角设计，使物料剪切分散达到物性要求。   W-shaped mixing chamber and M-shaped hammer to form a fully enclosed mixing space.The stirring blade is designed with a pri***atic helix no dead angle， so the material can be sheared and dispersed to meet the requirements.

2. 与物料接触部分（密炼室/侧板/压锤/搅叶轴）采用高碳钢，经调质、机加工，真空72小时深度氮化热处理后表面喷涂碳化钨，后做光洁度处理 耐磨，防腐蚀，不易粘料，使用寿命长。       The contact part with material (mixing chamber/side plate/hammer/stirring blade shaft) is made of high quality high carbon teel， which is tempered and machined with high precision. After 72 hours of deep nitriding heat treatment in vacuum， the surface is sprayed with tungsten carbide，after finishing，现货密炼机造粒机6， it is wear-resistant， corrosion-resistant， non-ticky and longer service life.

1. 混炼好的成团料直接投入造粒机料斗无需人工粉碎，直接造粒。Put agglomerate mixed material into the hopper of granulator directly and the material will be pelletized without manual crush.

2. 因为没有粉碎，无二次污染，减少粉尘污染，减少配方配比流失。There is no need to crush the material so secondary pollution can be ***oided， and can reduce the dust pollution and loss of formula.

3. 造出的颗粒会去除微气孔，喂料颗粒更均匀致密度更高。

There is no pores in the produced pellets， and the feed pellets are more uniform and higher density.