在熔管的时候，先用PPR管剪刀切好ppr管。切割时要把管子断面尽量剪平，彭水ppr水管，没有毛边和毛刺，管材和管件连接端面必须清洁，干燥、无污染，ppr水管品牌，否则会影响熔接效果。并在管材熔接口标上熔接深度线。
When melting the pipe， first cut the PPR pipe with PPR pipe scissors. When cutting， the cross-section of the pipe Try to cut it flat without burr and burr. The connecting end face of the pipe and fittings must be clean， dry and pollution-free， otherwise the welding effect will be affected. And the welding depth line is marked on the pipe welding joint.
PPR管和PVC管的区别可以以管径的粗细为依据，但是这种鉴别的要领就必要经历了。首先对管子的环境都要熟习，少要有印象。这样的话时间长了看到管子就知道其规格是多大的了。
The difference between PPR pipe and PVC pipe can be based on the thickness of pipe diameter， but the essentials of this identification must be experienced. First of all，ppr水管安装， we should be familiar with the environment of the pipe， and h***e less impression. In this way， after a long time， you can see the size of the pipe.
ppr管熔管的时候，发现成功率不高，主要为接管后发现会有点歪，个人比较主义，所以不满意的全部剪掉重来，这样导致会浪费很多接头。在熔管的时候，先用PPR管剪刀切好ppr管。
When the PPR pipe was melted， it was found that the success rate was not high. The main reason was that it would be a little crooked after taking over. It was individualistic，ppr水管价格， so it was not satisfied to cut all the parts and start over again， which would lead to a lot of joint waste. When melting the pipe， first cut the PPR pipe with PPR pipe scissors.
彭水ppr水管-Gafloon卡弗龙-ppr水管安装由台州艾菲力塑胶有限公司提供。台州艾菲力塑胶有限公司是一家从事“塑料制品（不含塑料桶）,橡胶制品（不含橡胶桶）,阀门”的公司。自成立以来，我们坚持以“诚信为本，稳健经营”的方针，勇于参与市场的良性竞争，使“Gafloon卡弗龙”品牌拥有良好口碑。我们坚持“服务至上，用户至上”的原则，使艾菲力塑胶在塑料管中赢得了客户的信任，树立了良好的企业形象。 特别说明：本信息的图片和资料仅供参考，欢迎联系我们索取准确的资料，谢谢！同时本公司还是从事PPR管，地暖管，PVC管的厂家，欢迎来电咨询。