PVC水管加盟-Gafloon卡弗龙(在线咨询)-PVC水管

水路改造需要改变水路方向，一定注意配件的质量，配件牌子也要注意，避免工人以次充好，选择同品牌配件，不同厂家用料配方肯定是不同的，即使热熔到一起也会留下隐患。配件也分热水管和冷水管，记得注意。另外，PVC水管加盟，还有水阀、保温棉、卡扣等配件。

The water road needs to change the direction of water road， pay attention to the quality of accessories，PVC水管厂家， and the brand of accessories. ***oid workers to fill the same brand parts with inferior ones. The material formula of different manufacturers must be different， even if the hot melt together will le***e hidden dangers. Accessories also include hot water pipe and cold water pipe. Remember to pay attention. In addition， there are water valve，PVC水管品牌， heat preservation cotton， other accessories.

ppr管熔管的时候，PVC水管，发现成功率不高，主要为接管后发现会有点歪，个人比较主义，所以不满意的全部剪掉重来，这样导致会浪费很多接头。在熔管的时候，先用PPR管剪刀切好ppr管。

When the PPR pipe was melted， it was found that the success rate was not high. The main reason was that it would be a little crooked after taking over. It was individualistic， so it was not satisfied to cut all the parts and start over again， which would lead to a lot of joint waste. When melting the pipe， first cut the PPR pipe with PPR pipe scissors.

ppr管道固定?

管道固定后才能使用中，管材不会因为水压而造成共振现象的发生。PPR水管在固定式，要使用管卡固定，对于管材间距在500mm左右，外径在25mm以下的管道，其在管道的终端10厘米处及水表处等地亦要设置管卡。

PPR pipe fixing

The pipe can not be used until it is fixed. The pipe will not cause resonance due to water pressure. PPR water pipe is fixed with pipe clamp. For pipes with pipe spacing of 500mm and outer diameter less than 25mm， pipe clamps shall be set at the end of pipeline at 10 cm and water meter.