企业资质

台州艾菲力塑胶有限公司

普通会员5
|
企业等级:普通会员
经营模式:生产加工
所在地区:浙江 台州
联系卖家:郑总(Rainy)
手机号码:13857609010
公司官网:aifeili66.tz1288.com
企业地址:浙江省台州市三门县西区开发区
本企业已通过工商资料核验!
企业概况

UKGAFLOONPIPEGROUPLTD是一家英国专注家装给排水管道集团公司,是集各种新型塑料管道研发、生产、销售及服务于一体的现代化、高科技的综合性企业实体,产品覆盖欧美地区长达20多年,销售网络多达108个**及地区,在家装水管市场多有褒誉。GAFLOON于2020年1月1日**台州艾菲力塑胶......

PVC水管-淮北PVC水管-Gafloon卡弗龙(查看)

产品编号:1000000000006230859                    更新时间:2021-12-26
价格: 来电议定
台州艾菲力塑胶有限公司

台州艾菲力塑胶有限公司

  • 主营业务:塑料制品(不含塑料桶),橡胶制品(不含橡胶桶),阀门
  • 公司官网:aifeili66.tz1288.com
  • 公司地址:浙江省台州市三门县西区开发区

联系人名片:

郑总(Rainy) 13857609010

联系时务必告知是在"产品网"看到的

产品详情






Uk Gafloon Pipe Group Ltd 提醒您水电安装预埋管线注意事项给排水部分

在套管预留预埋阶段容易出现漏埋,砖墙的话以后可以开洞。如果是剪力墙、或者重要梁的部位是非常麻烦的解决的办法,必须逐个核实套管的预留个数和预留位置。

Uk Gafloon Pipe Group Ltd reminds you of the water supply and drainage part of water and electricity installation

In the stage of casing reservation and embedment, it is easy to be missed. If the brick wall is used,PVC水管, the hole can be opened later. If it is the shear wall or the important beam, it is a very troublesome solution. The number  of the sleeve must be verified one by one.









ppr管在电气部分:

进地下车库的电缆保护管,套管必须出墙0.5m左右,PVC水管咨询,便于后期电缆封堵及外墙防水。

提前准备后期配套设施的规划图纸,如供配电施工图纸及室外管网图。这样可以缩短交房时间和节约成本。

地下车库的电气预埋前结合风管、管道图纸,避免灯具与风管和管道重叠,淮北PVC水管,造成后期灯具安装时敷设明线,增加造价及影响美观。

PPR tube in the electrical part:

For the cable protection pipe entering the underground garage, the sleeve must be about 0.5m out of the wall, which is convenient for later cable plugging and external wall waterproof.

Prepare the planning drawings of supporting facilities in advance, such as power supply and distribution building drawings and outdoor pipe network drawings. This can shorten the delivery time and s***e costs.

Before the electrical pre burying of underground garage, the air duct and pipeline drawings shall be combined to ***oid the overlapping of lamps with air duct and pipeline, resulting in the laying of open lines during the later installation of lamps, increasing the cost and affecting the appearance.








ppr管熔管的时候,发现成功率不高,主要为接管后发现会有点歪,PVC水管代理,个人比较主义,所以不满意的全部剪掉重来,这样导致会浪费很多接头。在熔管的时候,先用PPR管剪刀切好ppr管。

When the PPR pipe was melted, it was found that the success rate was not high. The main reason was that it would be a little crooked after taking over. It was individualistic, so it was not satisfied to cut all the parts and start over again, which would lead to a lot of joint waste. When melting the pipe, first cut the PPR pipe with PPR pipe scissors.





PVC水管-淮北PVC水管-Gafloon卡弗龙(查看)由台州艾菲力塑胶有限公司提供。台州艾菲力塑胶有限公司是一家从事“塑料制品(不含塑料桶),橡胶制品(不含橡胶桶),阀门”的公司。自成立以来,我们坚持以“诚信为本,稳健经营”的方针,勇于参与市场的良性竞争,使“Gafloon卡弗龙”品牌拥有良好口碑。我们坚持“服务至上,用户至上”的原则,使艾菲力塑胶在塑料管中赢得了客户的信任,树立了良好的企业形象。 特别说明:本信息的图片和资料仅供参考,欢迎联系我们索取准确的资料,谢谢!同时本公司还是从事PPR管,地暖管,PVC管的厂家,欢迎来电咨询。

台州艾菲力塑胶有限公司电话:400-1182827传真:400-1182827联系人:郑总(Rainy) 13857609010

地址:浙江省台州市三门县西区开发区主营产品:塑料制品(不含塑料桶),橡胶制品(不含橡胶桶),阀门

Copyright © 2025 版权所有: 产品网店铺主体:台州艾菲力塑胶有限公司

免责声明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责。产品网对此不承担任何保证责任。