虹口区PVC水管-Gafloon卡弗龙-PVC水管电话

ppr管在电气部分：

部分开关、插座被后续的给、排水管道、厨卫风道等掩盖，所以施工前必须结合土建预留预埋，考虑到位。

室内强、弱电插座盒位置不合理，强电盒距弱电盒距离太近，一般要求为20cm，特别是卧室的插座，PVC水管厂家，后期业主装修时插座被衣柜、床遮住，造成业主不满意。

PPR tube in the electrical part:

Some switches and sockets are covered by subsequent water supply and drainage pipes， kitchen and bathroom air ducts， so they must be reserved and embedded in combination with civil engineering.

The location of the indoor strong and weak current socket box is unreasonable. The distance between the strong and weak current boxes is too close. Generally， it is required to be 20cm， especially for the socket in the bedroom. The socket is covered by the wardrobe and bed during the later decoration of the owner， causing the owner dissatisfaction.

水路改造需要改变水路方向，一定注意配件的质量，配件牌子也要注意，避免工人以次充好，选择同品牌配件，不同厂家用料配方肯定是不同的，即使热熔到一起也会留下隐患。配件也分热水管和冷水管，记得注意。另外，还有水阀、保温棉、卡扣等配件。

The water road needs to change the direction of water road， pay attention to the quality of accessories， and the brand of accessories. ***oid workers to fill the same brand parts with inferior ones. The material formula of different manufacturers must be different， even if the hot melt together will le***e hidden dangers. Accessories also include hot water pipe and cold water pipe. Remember to pay attention. In addition， there are water valve， heat preservation cotton， other accessories.

PPR 管材与 PPR 塑件连接，是常见的连接方式，通常大家听到的，ppr 管材热熔连接，就是说的这种方式，PVC水管电话，我们经常见到的，直接连接，大多采用 PPR 管和直接塑件进行热熔连接，ppr 管材，与 PPR 嵌件伸缩节，可直接进行热熔承插连接。

PPR pipe and PPR plastic parts connection， is a common way of connection， usually you hear， PPR pipe hot-melt connection， that is to say， this way，虹口区PVC水管， we often see， direct connection， mostly using PPR pipe and direct plastic parts for hot-melt connection， PPR pipe， and PPR insert expansion joint， can be directly hot-melt socket connection.