ppr管热熔操作
热熔器接通电源，到达温度指示灯亮后方能开始操作。
切割管材必须使端面垂直于管轴线，管材切割一般使用管子剪，如为大管径，则用锯条切割，切割后断面去毛刺和毛边。
Hot melt operation of PPR pipe
The heat melt can be operated after the power is turned on and the temperature indicator light is on.
The end face of the pipe must be perpendicular to the pipe axis. Pipe cutting is generally used. If the pipe diameter is large， it is cut with a saw blade. After cutting， the sected shall be deburring and burr free.
水阀
水路改造时，记得家里要安装一个总水阀，用来开启和关闭水流。这样家中发生漏水，或者需要更换水阀的时候，石景山区PVC排水管，不用跑到楼下关水。水阀可以安装在水槽下方，不占空间。水阀价格比较贵，如果，你不提醒，工人不一定给你装，等瓷砖贴好再发现就迟了。
Water valveWhen rebuilding waterways， remember to install a main water valve at home to open and close the water flow. In this way， when there is leakage in the house or the tap needs to be replaced，PVC排水管生产， there is no need to run downstairs to turn off the water. The water valve can be installed under the water tank without occupying space. The price of water valve is more expensive. If you don"t remind， the workers don"t h***e to install it for you. It"s too late to find it after the tiles are pasted.
ppr管在电气部分：
进地下车库的电缆保护管，PVC排水管电话，套管必须出墙0.5m左右，便于后期电缆封堵及外墙防水。
提前准备后期配套设施的规划图纸，PVC排水管厂家，如供配电施工图纸及室外管网图。这样可以缩短交房时间和节约成本。
地下车库的电气预埋前结合风管、管道图纸，避免灯具与风管和管道重叠，造成后期灯具安装时敷设明线，增加造价及影响美观。
PPR tube in the electrical part:
For the cable protection pipe entering the underground garage， the sleeve must be about 0.5m out of the wall， which is convenient for later cable plugging and external wall waterproof.
Prepare the planning drawings of supporting facilities in advance， such as power supply and distribution building drawings and outdoor pipe network drawings. This can shorten the delivery time and s***e costs.
Before the electrical pre burying of underground garage， the air duct and pipeline drawings shall be combined to ***oid the overlapping of lamps with air duct and pipeline， resulting in the laying of open lines during the later installation of lamps， increasing the cost and affecting the appearance.
PVC排水管厂家-石景山区PVC排水管-Gafloon卡弗龙由台州艾菲力塑胶有限公司提供。台州艾菲力塑胶有限公司坚持“以人为本”的企业理念，拥有一支高素质的员工***，力求提供更好的产品和服务回馈社会，并欢迎广大新老客户光临惠顾，真诚合作、共创美好未来。艾菲力塑胶——您可信赖的朋友，公司地址：浙江省台州市三门县西区开发区，联系人：郑总（Rainy）。同时本公司还是从事PPR管，地暖管，PVC管的厂家，欢迎来电咨询。