IC693ALG220工控DCS通讯CPU模块系统备件全欢迎咨询来电

各品牌DCS;PLC停产备件模块

本公司：

PLC、DCS系统备件 模块

〖⒈〗Allen-Bradley(美国AB)系列产品》

〖⒉〗(莫迪康电气)系列产品》

〖⒊〗General electric(通用电气)系列产品》

〖⒋〗Westinghouse（美国西屋）系列产品》

〖⒍〗销售ABB Robots. FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots

〖⒎〗estinghouse（西屋）： OVATION系统、WDPF系统、MAX1000系统备件。

〖⒏〗Invensys Foxboro（福克斯波罗）：IA Series系统，FBM（现场输入输出模块）顺序控制、梯形逻辑控制、事故追忆处理、数模转换、输入输出信号处理、数据通信及处理等。Invensys Triconex冗余容错控制系统、基于三重模件冗余（TMR）结构的现代化的容错控制器。

〖⒑〗Bosch Rexroth（博世力士乐）：Indramat，IO模块,PLC控制器,驱动模块等。

〖⒒〗Motorola（摩托罗拉）：MVME 162、MVME 167、MVME1772、MVME177等系列。

深圳长欣是一家专注于电气工程和工业自动化的备件批发商。深圳长欣与众多制造商合作，专注于提供零部件，原始设备制造商，面板制造商，行业和终用户的停产部件解决方案

　　在B-to-B电气产品拥有市场，在其市场中为客户提供帮助

　　通过遍布65个5大洲的密集网络，开发了停产部件解决方案，致力于将价值的工业备件以及服务更贴近客户

　　我们很自豪成为工业零部件标准制定者

主要特点：

IC693ALG220是一个模拟输入模块，是90-30系列平台的一部分，目前由艾默生自动化公司（Emerson Automation）管理，以前由GE Fanuc生产。该模块有四（4）个电压输入通道，接收+/-10 VDC的输入信号。该模块具有内置的ADC转换器，可将数据转换为分辨率为5 mV/20µA（1 LSB=5 mV）的等效数字，更新速率为4 ms，输入滤波器响应为17 Hz。

The IC693ALG220 is a Series 90-30 module that is formerly manufactured by GE Fanuc, currently under Emerson Automation. This module mainly functi*** as analog input module, compatible with input signal range of - 10 VDC to + 10 VDC. This module is optionally compatible with 0-20 mA signals which can be enabled by installing a 250 Ohm to the module’s user terminal connector.The IC693ALG220 is installed with Analog to Digital Converter (ADC) with conversion resolution of 12 bits for voltage input; 10 bits for current input which can be increased to 11 bit with the use of a precision resistor. Each channel of the module has individual update rate of 4 ms while the module is powered by the 24VDC provided by the PLC power supply. It has a backplane current c***umption of 27 mA from +5 volt bus on the backplane and 98 mA from the isolated +24 volt backplane bus. It is mounted to any ***ailable I/O slot of the 5 or 10 slot Series 90-30 baseplate and occupies a single slot of the rack.The IC693ALG220 has typical absolute accuracy of +/-10 mV/40 µA while the maximum is +/-30 mV/160 µA over operating temperature. It has linearity of # 1 Least Significant Bit (LSB), input filter resp***e of 17 Hz, module isolation of 1500 volts between field side and logic side, cross channel rejection of > 80 db and input impedance of > 9 Megohms in voltage mode and 250 ohms when operating at current mode.The IC693ALG220 module is an analog input module by GE Fanuc, which is part of the Series 90-30. This input module, which is a component of programmable logic controller (PLC), comes with 4 input channels. Each channel can easily convert an analog signal to a digital signal, according to the user application requirements. Additionally, the GE Fanuc IC693ALG220 C*** input module allows the users to convert input signals ranging from -10 to +10 Volts. The conversion speed for every channel is around 1 millisecond. Thus, the IC693ALG220 input module provides an update rate for around 4 milliseconds for any channel at a time. The converted signal has resolution of 12 bits binary.The GE Fanuc IC693ALG220 input module comes equipped with a limited current input mode, as well as a jumper on each channel’s user terminal connector. Users can use the jumper to connect an internal 250 ohm shunt resistor to the circuit. This shunt resister allows for an input range of -40 to +40 milliamps. However, it is essential for the users to monitor the input current c***tantly to prevent the input resistor from self-heating, because this could affect the current accuracy negatively. The main power supply of the GE Fanuc IC693ALG220 C*** input module is an isolated +24 Volts DC power supply, which is supplied through a PLC power supply. The voltage is sent through a regulator/inverter to produce the required voltage for the IC693ALG220 module to operate. The IC693ALG220 input module comes with an LED which shows the users its operation status.