影响压滤机入料泵时间的因素如下：
1、浆料粘度。浆料越细越粘，则过滤速度越慢，反之亦然。
2、压滤机入料泵压力与流量。这个好理解，流量高压力大则过渡速度也快。但要有限度，一般来说，入料压力不要超过0.6MPa，至于流量，要视压滤机的过滤面积而定。
3、滤布。滤布厚实，则过滤速度慢。
总之，终决定过滤速度应当是料本身。因为浆料泵和滤布可以合理选型。为了提高浆料过滤速度，除合理选择泵和滤布以外，还可以考虑在浆料中加入絮凝剂
压滤机入料泵
压滤机入料泵流量和扬程的关系
压滤机入料泵泵的流量和扬程是衡量水泵性能的重要数据，同时也是选型的重要依据。流量通常用字母Q来表示，单位为立方米每秒（m3/s），压滤机入料泵厂家，数值表示单位时间内输送水的数量；扬程通常用字母H来表示，单位为米（m），数值表示水泵能够扬水的高度。二者之间是反比的关系，流量大了扬程就低，扬程高了流量就小，压滤机入料泵水泵的出厂标牌或者说明书上都会标明这些数据。
压滤机入料泵由于其特殊的工况，流量扬程并不是恒定不变的，初期泵的流量大扬程低，后期流量小扬程高，这样设计也更加符合压滤机的输送要求。
The relatihip between pump flow and head压滤机入料泵
The flow rate and head of the pump are important data to measure the performance of the pump， and also an important basis for type selection. Flow is usually expressed by the letter Q， in cubic meters per second (m3/s)， and the numerical value indicates the amount of water transported per unit time; head is usually expressed by the letter H， in meters (m)， and the numerical value indicates the height of water pumps can lift. There is an inverse relatihip between the two. When the flow is large， the head is low， and when the head is high， the flow is ***all. These data will be marked on the label or instruction of the pump.压滤机入料泵
Because of its special working conditi， the flow head of the feed pump of filter press is not ctant. The flow head of the initial pump is large，压滤机入料泵配件， the flow head is low， and the flow head of the later pump is ***all， so the design is more in line with the conveying requirements of filter press.
压滤机入料泵流量扬程选择
在设计压滤机泵时参考了国内主流的压滤机设备，并结合了多年来客户的使用情况，设定了几种常用的压滤机泵型，其流量扬程能够满足市场通用的各种型号压滤机。
在不同型号间选择时，应遵循选大不选小原则，因为型号大的泵初始流量大，有利于压滤机初期快速均匀布料，sya型压滤机入料泵，提高生产效率，防止物料分布不均造成后期压力不稳定对设备造成影响。
另外选择泵的压滤机入料泵压力时要看扬程高点的压力，此时的压力为压滤机压榨期的泵的工作压力，也是泵输出的大压力值。
压滤机入料泵Selection of flow head for feed pump of filter press
In the design of the special pump for filter press， the domestic mainstream filter press equipment was culted，压滤机入料泵， and combined with the use of customers for many years， several common types of filter press pump were set up， whose flow head can meet the needs of various types of filter press commonly used in the market.
When choosing different models， we should follow the principle of choosing big ones instead of ***all ones， because the initial flow rate of large pumps is large， which is beneficial to the rapid and uniform distribution of materials in the initial stage of filter press， to improve production efficiency， and to prevent the influence of unstable pressure in the later stage caused by uneven distribution of materials on the equipment.
In addition， when choosing the pressure of the pump， it depends on the pressure of the highest point of the lift. At this time， the pressure is the working pressure of the pump during the press period of the filter press， and also the maximum pressure value of the output of the pump.
压滤机入料泵厂家-程跃泵业-压滤机入料泵由河北程跃泵业有限公司提供。河北程跃泵业有限公司在污水泵、杂质泵这一领域倾注了诸多的热忱和热情，程跃泵业一直以客户为中心、为客户创造价值的理念、以品质、服务来赢得市场，衷心希望能与社会各界合作，共创成功，共创辉煌。相关业务欢迎垂询，联系人：徐经理。同时本公司还是从事潜水排污泵，WQ潜水排污泵，潜水排污泵厂家的厂家，欢迎来电咨询。