河北程跃泵业有限公司厂家批发65ZJW-II压滤机入料泵 洗煤厂压滤机泵 工业轻型渣浆泵
河北程跃泵业有限公司厂家批发80ZJW-II压滤机入料泵 浮选机入料泵 压滤机泥浆泵
河北程跃泵业有限公司厂家批发100ZJW-II压滤机入料泵 压滤机配套泵 矿用渣浆泵
河北程跃泵业有限公司厂家批发125ZJW-II压滤机入料泵密封型入料泵 无泄漏入料泵
欢迎各位客户来电咨询,咨询电话请看下面的图或者本公司的网站。





压滤机入料泵使用注意
压滤机入料泵使用注意
压滤机入料泵禁止盲目开大出口阀门,以免造成烧坏电机。需啊哟调整排料量时,切记应调整出口阀门,调整进料阀门易造成泵汽蚀,65zje-ii压滤机入料泵,损害极大。如果泵的进料页面过高(超过20m)或进料压力过大而造成盘根漏料时要适当押金盘根,达到不漏料为宜,不可压的过紧。
压滤机入料泵停止工作操作
为了避免停泵漏料,停泵前可适当压紧一点盘根。关闭进口阀门,并马上停泵,以免发生倒压造成泵的反转发生设备损坏和盘根向外漏料。并快速打开放料阀门,后慢慢打开泵的出口阀门,将出料管内的物料放完,为了避免杂质在泵腔内沉积堵塞,必要时要安装冲洗水管进行冲洗。压滤机入料泵
Pay attention to the use of feed pump of filter press
It is forbidden to blindly open large outlet valves in order to ***oid burning out the motor. When you need to adjust the discharge volume, remember to adjust the outlet valve. Adjusting the feed valve can easily cause pump c***itation, causing great damage. If the feed page of the pump is too high (more than 20m) or the feed pressure is too high to cause the leakage of the packing roots, the appropriate depsit for the packing roots should be made, so as not to leak,sya型压滤机入料泵, not to press too tight.
Stop operation of feed pump of filter press
In order to ***oid leakage during shutdown, a little packing can be properly pressed before shutdown. Close the inlet valve and stop the pump immediately so as not to cause the back pressure of the pump to cause damage to the reverse generating equipment and leakage of the packing roots. And quickly open the discharging valve, and finally slowly open the outlet valve of the pump, discharging the material in the feeding pipe, in order to ***oid impurity depsition in the pump chamber clogging, if necessary,压滤机入料泵, to install a flushing pipe for flushing.
压滤机入料泵双叶轮泵比单叶轮泵抗衡耐磨性更好
因双叶轮泵以较低的叶轮出口线速度获得更高的泵出口压力从而克服了单叶轮泵为增加压力而增加叶轮线速度,压滤机入料泵轴头,而导致叶轮、泵壳磨损加剧的缺点,有效的提高水泵等过流部件的寿命。
压滤机入料泵应用范围广
该产品可采用铸钢、高铬铸铁、不锈钢等多种材质制造,可适合不同的介质需求,用户选用的范围更广。
压滤机入料泵轴头-压滤机入料泵-程跃泵业由河北程跃泵业有限公司提供。“纸浆泵,渣浆泵,泥浆泵,双吸泵,压滤机入料泵,多级泵,污水泵”选择河北程跃泵业有限公司,公司位于:河北安国市石佛镇路景工业园区景旺路8号,多年来,程跃泵业坚持为客户提供好的服务,联系人:徐经理。欢迎广大新老客户来电,来函,亲临指导,洽谈业务。程跃泵业期待成为您的长期合作伙伴!同时本公司还是从事潜水排污泵,WQ潜水排污泵,潜水排污泵厂家的厂家,欢迎来电咨询。