Product Data HEMPADUR MASTIC 45880 PHYSICAL C***TANTS: The physical c***tants stated are nominal data according to the HEMPEL Group&＃39;s approved formulas. Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: VOC content: Fully cured: Dry to touch: Specific gr***ity: Flash point: - 12170* / Grey. (see REMARKS overleaf) Semi-gloss 80 ± 1 6.4 m2 /l [256.6 sq.ft./US gallon] - 125 micron/5 mils 3 hour(s) 20°C/68°F 14 day(s) 10°C/50°F - *Wide range of colours ***ailable via Hempel&＃39;s MULTI-TINT system.
45880: BASE 45889: CURING AGENT 95880
Description:
Recommended use:
Service temperature:
Certificates/Approvals:
***ailability:
HEMPADUR MASTIC 45880 is a two-component polyamide adduct cured, high solids, high build epoxy
paint. It forms a hard and tough coating, has good wetting properties and low temperature curing.
As a selfprimed, surface tolerant paint system or as an intermediate or finishing coat in he***y duty
paint systems where low VOC and high film build are required.
For immersed areas HEMPADUR MASTIC 45880 is only recommended for minor repairs.
Can be specified where extended recoating properties for polyurethane topcoats are requested
(typically tr***el coating). May be used directly on cured zinc silicate (GALVOSIL products) or spray
metallized surfaces to minimize popping.
Shade 18600 can be used in paint systems complying with European ATEX Regulation EN 13463-1:
2001, please c***ult Hempel for specification advice. Please also note that Shade 18600 will h***e a
lower gloss than usual for other shades.
Maximum, dry exposure only: 120°C/248°F.
Part of Group Assortment. Local ***ailability subject to confirmation.
In accordance with Aramco’s specification APCS 1, APCS 12, APCS 26 and 26T.
Tested according to section 175.300 of the Code of Federal Regulati*** Title 21 - Dry Foodstuff.
C***ult Hempel for details.
Complies with European Fire Standard EN 13501-1; classification B-s1, d0.
Tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great
Britain.
Approved as a low flame spread material when used as part of a predefined paint system. Please refer
to “Declaration of Conformity” on for further
