Sigma A-CP是一系列传统的消防控制面板，带有可选的内置通讯器。
对于两个、四个或八个启动电路，所有面板可通过多个前面板操作编程方法进行广泛配置。
低待机功率要求和经济***的小型电池允许面板安装在一个***的外壳中，该外壳有红色或***。
一个简单的编程方法只使用3个前面板按钮，允许设置和查看大量的配置选项列表。
单板结构使得只需拆卸两个螺钉即可轻松拆卸所有电子部件，并且提供了充足的电缆引入孔，简化了安装。
4安培通知设备电源和内置可选同步协议为各种标准通知应用程序提供充足的电源和控制。
内置RS485通信总线提供连接4线信号机或辅助继电器板的设施，以提供整个场所的进一步指示和控制选项。
可选的DACT允许向中心站进行双线报告，并提供500个事件历史缓冲区。
The Sigma A-CP is a range of conventional fire control panels with an optional built-in communicator. With two, four or eight initiating circuits all panels can be extensively configured via a somple front panel operated programming method. The low standby power requirements and cost effective ***all batteries allow the panel to be mounted in a discrete enclosure which is ***ailable in red or grey. A simple programming method using just 3 front panel butt*** allows an extensive list of configuration opti*** to be set and reviewed. Single board c***truction enables easy removal of all electronic parts by removing just two screws, and ample provision of cable entry knockouts simplify installation. 4 Amp notification appliance power and built-in selectable sync protocols provide ample power and control for a wide range of standard notification applianaces. The built-in RS485 communicati*** bus provides the facility to connect 4 wire annunciators or ancillary relay boa*** to provide further indication and control opti*** throughout a premises. The optional DACT allows dual line reporting to central stati*** and provides a 500-event history buffer. Conventional Control Panel SIGMA A-CP D
