真空干燥机轴承需要仔细检查和定期检查，以确保真空干燥器的使用寿命和长期运行。今天我们将介绍一些准备工作。
The bearings of vacuum dryer need to be carefully inspected and periodically inspected to ensure the service life and long-term operation of vacuum dryer. Today we will introduce some preparati***.
1。旋转外圈，仔细清洗笼子、滚筒和滚道连接器，彻底任何先前隐藏的残留物。真空干燥器南京SKF轴承应靠近干洗清洗，清洁衬里中性支撑干燥，或在远红外线干燥箱中缓慢干燥。
1. Rotate the outer ring, carefully clean the cage, drum and raceway connectors, and thoroughly remove any previously hidden residues. Nanjing SKF bearings of vacuum dryer should be cleaned close to dry cleaning, clean liner neutral support drying, or drying slowly in far infrared drying box.
因为连续干洗接近于干燥或干燥，所以整个过程不应该放置在真空干燥机的轴承环上，并粘附在任何框架或辊子上。真空干燥机轴承油可从密封包装中提取，浸渍在3个点无酸煤油或***洗涤剂中，然后送往实际测试。·
Because continuous dry cleaning is close to drying or drying, the entire process should not be placed on the bearing ring of a vacuum dryer and adhered to any frame or roller. Bearing oils for vacuum dryers can be extracted from sealed packages, impregnated in acid-free kerosene or gasoline detergents at three points, and then sent to the actual test. ·
2。检查南京SKF轴承是否滴入润滑油，并立即输送干式或干式真空干燥器。没有油膜来保护轴承的外表面。检查人员不允许在整个过程中直接接触皮肤。操作人员应戴上干净的手套，涂上带锈的油漆，但须避免将轴承放在防锈搅拌辊真空干燥机上，否则测量结果会产生偏差。
2. Check whether the SKF bearing of Nanjing is dripped into lubricating oil, and immediately deliver dry or dry vacuum drier. There is no oil film to protect the outer surface of the bearing. The inspectors are not allowed to contact the skin directly throughout the process. Operators should wear clean gloves, coated with rusty paint, but must ***oid putting bearings on the rust-proof mixing roller vacuum dryer, otherwise the measurement results will be deviated.
3。生锈的原材料应立即供应或处理。整个检查过程应在真空干燥机轴承检查后完成。时间过长，以免造成腐蚀。要注意使用清洁和无油的纯***，这也会引起腐蚀。
3. Rusty raw materials should be supplied or disposed of immediately. The whole inspection process should be completed after the bearing inspection of the vacuum dryer. The time is too long, so as not to cause corrosion. Attention should be paid to the use of clean and oil-free pure gasoline, which will also cause corrosion.
4。如果真空干燥机的南京SKF轴承是干的或干的，润滑油应滴入轴承的外表面，而不需要真空干燥机的薄膜保护，并应根据需要检查是否及时交付。此时，在整个检查过程中不允许与皮肤直接接触。操作者应戴干净手套和手锈，但须避免防锈剂。真空干燥机的滚动表面与手混合，否则将测量结果的偏差。
4. If the Nanjing SKF bearing of the vacuum dryer is dry or dry, the lubricating oil should be dripped into the outer surface of the bearing without the film protection of the vacuum dryer, and should be checked for timely delivery as required. At this point, direct contact with skin is not allowed during the entire inspection process. Operators should wear clean gloves and hand rust, but ***oid rust inhibitors. The rolling surface of the vacuum dryer is mixed with the hand, otherwise the deviation of the result will be measured.
5。真空干燥机南京SKF轴承在交付后或腐蚀检查后应立即检查。检查过程不应持续太久，以免腐蚀。要注意使用清洁和无油的纯***，这也会引起腐蚀。
5. Vacuum dryer Nanjing SKF bearing shall be inspected immediately after delivery or after corrosion inspection. The inspection process should not last too long to ***oid corrosion. Attention should be paid to the use of clean and oil-free pure gasoline, which will also cause corrosion.
6。在南京SKF轴承检查前，为了在室温下快速均匀化这些物体，印制了一些测量块、标准件、测量仪器和金属检查板用于办公室检查。
6. Before SKF bearing inspection in Nanjing, in order to homogenize these objects rapidly at room temperature, some measuring blocks, standard parts, measuring instruments and metal inspection boa*** were printed for office inspection.
显然，只有严格的准备才能保证试验结果的准确性，真空干燥机轴承在整个试验过程中不会生锈。
***iously, only strict preparation can ensure the accuracy of the test results, vacuum dryer bearings throughout the test process will not rust.
文章来自：南京SKF轴承 www.wh-
The article is from: Nanjing SKF bearing www.wh-
文章来自：南京INA轴承 a-
The article is from: Nanjing INA bearing a-
文章来自：南京NSK轴承
The article is from: Nanjing NSK bearing
***：524085168
电话：0510-81207777
手机：13311666672