进口气动不锈钢调节阀排行榜前十名_德国（莱克）品牌

进口气动不锈钢调节阀

德国（莱克）原装进口气动不锈钢调节阀10T00R系列套筒单座软密封切断阀，采用套筒导向，压力平衡式阀芯。利用平衡密封环代替上阀座，使传统的套筒双座阀结构变为套筒单座结构，这一改进大大提高了套筒阀的泄漏等级。阀座处镶嵌PTFE，做成软密封结构。该类型调节阀适用于介质为气体或者液体温度不高的切断场合。

阀芯利用压力平衡式结构，启闭力小通过较小的执行机构推力就能控制高压差的工况。密封性能好、允许压差大。套筒导向，导向面积大，稳定性好，结构紧凑，可以快速在线更换阀内件，维修效率高，节约人力和时间。平衡式阀芯结构确保所需的执行机构推力***小。
Pneumatic stainless steel regulating valve, he 10T00 Series cage single-seat control valve adopts the cage guided structure and pressure balanced plug. It is suitable for applicati*** with relatively high differential pressure. The balanced seal ring replaces the upper seat to change the traditional cage double-seat structure into the cage single-seat structure. This improvement has greatly enhanced the shut-off class of the cage valve. The plug makes use of the pressure balanced structure, the opening and closing force is low and the media under service conditi*** with high differential pressure can be controlled through relatively low actuator thrust. It is widely used for fluid control on pipelines of middle and low temperatures and middle and low pressures that require good dynamic stability. With such features as good sealing performance, high allowable differential pressure, cage guiding, large guiding area, good stability and compact structure, it can realize fast replacement of trims on the line with high maintenance efficiency, s***ing manpower and time. The balanced plug structure makes sure that the actuator thrust required is the lowest.

Parameters of control valves：