台湾全冠內迫式电缆防水接头系列
上海颐品自动化科技有限公司
Hexagonal Fitting Cable Glands (M-Type)
210-7010 內迫式***纜固定*** (M型) Cable Glands (M-Type)
‧螺牙規格：公制牙 ( Metric / EN50262 )，符合歐盟規範。
‧產品材質：A.C.E.F 部份以 UL 認可之尼龍 PA66 ***成 ( 防火等級 UL 94V-2 )，
B 及 D 部份採用標準 EPDM 戶外耐候橡膠，客戶亦可指定選擇 NBR ***械耐油橡膠。( 其他用途橡膠可接受****** )
‧產品特性：傳統***械使用，新改良之特殊內迫式夾緊爪與夾緊圈之設計，夾緊***纜範圍大，可防水防塵、抗拉力特強，本產品全數通過1000 小時抗 UV 耐候實驗且防水與抗拉功能不***，產品有耐酸鹼、耐化***與一般溶劑等特性。
‧工作溫度：-40℃ 至 100℃。
＊不附螺帽型：請於產品編***後加 -XA，***低******數量與價格另議。
例：M20-13B-XA 為 M20-13B 之產品但不附螺帽（A部）。
Thread Type: Metric, according to EN 60423.
Material Data: Halogen-free Nylon PA 66 (Flammability UL 94V-2) for A.C.E.F parts. (Contact us for Flammability V0 material).
Standard in weather-resistant EPDM rubbers for 8.D parts. (NBR rubber is optional for oil-resistance applicati***).
Our black cable glands are suitable for outdoor use h***e been subjected to UV light exposure and water immersion same as UL746C (f1) rating.
UV (Irradiance 340 nm) exposure is performed by using a xenon-arc weatherometer for 1000 hours and intermittent exposure to water spray.
IP Protection: IP68 - 5 bar.
Working Temp.: -40°C to 105°C. Short-Term to 160°C.
Application: ***C UL-certified cable gland with an inner-cone-shape hexagonal fitting is a type for mounting cable with spanner. One flex-protecting type can limit the cable bending to ***oid twisted and protect the cable jacket against break at the bending point to reduce the risk of failure. With their outstanding ability in weather resistance, strain relief, watertight performances, the flex-protecting cable glands are the cable entry systems with safety features used in the fields of flexible cables on hand-held equipment, moving machine parts and other instruments.
* The Washer (Gasket) and Lock Nut are all included in each cable gland, this s***es additional ordering work and storage locati***.
| Style | Thread | . | Cable Range mmØ |
Thread O.D. C1 mm |
Panel Mounting Hole mm |
Thread Length C2 mm |
Spanner Size A/F mm |
Std. Pkg. pcs |
|
| Sizes | Black RAL 9005 |
||||||||
| M Type |
M16x1.5 | M16-07 | B | 7-4 | 16 | 16-16.3 | 15 | 22/19 | 50 |
| M16-10 | B | 10-6 | 16 | 16-16.3 | 15 | 22/19 | 50 | ||
| M20x1.5 | M20-09 | B | 9-5 | 20 | 20-20.3 | 15 | 27/24 | 50 | |
| M20-13 | B | 13-8 | 20 | 20-20.3 | 15 | 27/24 | 50 | ||
| M25x1.5 | M25-13 | B | 13-7.5 | 25 | 25-25.4 | 15 | 33/29 | 50 | |
| M25-18 | B | 18-12 | 25 | 25-25.4 | 15 | 33/29 | 50 | ||
| M32x1.5 | M32-22 | B | 22-15 | 32 | 32-32.4 | 15 | 41/36 | 10 | |
| M32-24 | B | 24.7-18 | 32 | 32-32.4 | 15 | 41/36 | 10 | ||
| M40x1.5 | M40-25 | B | 25-18 | 40 | 40-40.4 | 21.5 | 50/43 | 10 | |
| M40-30 | B | 30-22 | 40 | 40-40.4 | 21.5 | 50/43 | 10 | ||
| M50x1.5 | M50-32 | B | 32-25 | 50 | 50-50.4 | 22 | 62/54 | 10 | |
| M50-39 | B | 41-31 | 50 | 50-50.4 | 22 | 62/54 | 10 | ||
| M63x1.5 | M63-46 | B | 46-38 | 63 | 63-63.4 | 25 | 75/66 | 10 | |
| M63-49 | B | 51-44 | 63 | 63-63.4 | 25 | 75/66 | 10 | ||
| M-P Type |
M16x1.5 | M16-P-07 | B | 7-4 | 16 | 16-16.3 | 15 | 22/19 | 10 |
| M16-P-09 | B | 9-6 | 16 | 16-16.3 | 15 | 22/19 | 10 | ||
| M20x1.5 | M20-P-09 | B | 9-6 | 20 | 20-20.3 | 15 | 27/23 | 10 | |
| M20-P-13 | B | 12.7-8 | 20 | 20-20.3 | 15 | 27/23 | 10 | ||