台湾全冠8孔尼龙电缆防水接头系列
上海颐品自动化科技有限公司
Multi-Hole Insert Cable Glands (8 Holes)
210-8010 多孔***纜固定*** (8孔) Multi-Hole Cable Glands (8 Holes)
‧螺牙規格：公制牙 ( Metric / EN50262 )、PG 牙、G ( PF ) 牙及 NPT 牙(不附螺帽A部)。
短螺紋適合接合於薄型***板的出***孔或是對應於附有內(攻)牙出***孔的設備，長螺紋適合接合於厚型***板的出***孔。
‧產品材質：A.C.E.F 部份以 UL 認可之尼龍 PA66 ***成 ( 防火等級 UL 94V-2 )，
B 及 D 部份採用標準 EPDM 戶外耐候橡膠，客戶亦可指定選擇 NBR ***械耐油橡膠。( 其他用途橡膠可接受****** )
‧產品特性：本產品為多出***孔型設計，這個傑出的功能可以***多條***纜***同時整合在一個出***孔上，不僅能大幅地縮減施工時間，降低成本，亦可以減少出***孔所佔用的空間，絕對是一個一舉多得的好產品。本產品其精密美觀的外型設計，搭配特殊A型的設計技術，使用者可依照******外徑尺寸選擇出***密合的產品尺寸來搭配，便能達到固定抗拉與防塵防水的優秀效果。本產品全數通過 1000 小時抗 UV 耐候實驗且防水與抗拉功能不***，產品可耐酸鹼、耐化***與一般溶劑等抗腐蝕特性並廣泛應用於***子、網路、***信、通訊、偵測、測量、照明、音響、視***、***誌、數位顯示、控制儀器、******、***器等設備的出***孔上。
‧工作溫度：-40℃ 至 100℃。 ( 產品規格與安規承認書、RoHS 聲明書均可於購買產品後要求索取 )
＊為求得***佳的防水效果，建議所有***纜***使用相同的外徑，並參考產品規格表中的***大 " 適用***纜φ值 " 作為選擇依據。
＊本公司可接******作各種尺寸與形狀的多孔夾緊圈，包括不同大小的***纜***外徑可以同時整合在一個出***孔上，並得到防塵防水的效果。
＊依不同的需求，本產品亦可***夾緊圈內的個別穿***孔作為預留孔備用，請搭配本目錄第 230-2520 類的 SPM 塞棒產品使用。
＊不附螺帽型：請於產品編***後加 -XA，***低******數量與價格另議。
例：MG20A-H8-02B-ST-XA 為 MG20A-H8-02B-ST 之產品但不附螺帽（A部）。
Thread Type: Metric, PG, G(PF) and NPT.
Material Data: Halogen-free Nylon PA 66 (Flammability UL 94V-2) for A.C.E.F parts. (Contact us for Flammability VO material).
Standard in weather-resistant EPDM rubbers for B.D parts. (NBR rubber is optional for oil-resistance applicati***).
Our black cable glands are suitable for outdoor use h***e been subjected to UV light exposure and water immersion same as UL746C (f1) rating.
UV (Irradiance 340 nm) exposure is performed by using a xenon-arc weatherometer for 1000 hours and intermittent exposure to water spray.
IP Protection: IP68 - depending on the less differences between cable diameters & sealing-hole openings. (Less is Better)
Working Temp.: -40°C to 105°C. Short-Term to 160°C.
Application: With ***C's unique clamping design, a multi-hole cable gland allows several cables to be lead through it simultaneously and can provides excellent watertight performance for each wire. From the widest variety choices of ***C's gland bodies & multi-hole inserts, there is no need to use one gland for each wire, so the spaces of wire entries can be reduced (good for limited spaces ). These high quality cable glands are the best soluti*** to minimize the costs, spaces and working time for used on any kind of outdoor / indoor equipment in multi-cable entry applicati***.
* Contact us for designing & ordering different sealing hole patterns with varying diameters & other extended gland sizes. (Sealing Inserts are not sold separately)
* ***C sealing inserts are ***ailable in split versi*** for mounting wires with pre-assembled terminals or connectors. (Minimum order quantity is required)
* The Washer (Gasket) and Lock Nut are all included in each cable gland, this s***es additional ordering work and storage locati***.
| Seal Holes |
Thread | . | Cable Range mmØ |
Thread O.D. C1 mm |
Panel Mounting Hole mm |
Thread Length C2 mm |
Spanner Size A/F mm |
Std. Pkg. pcs |
||||
| Sizes | Black RAL 9005 |
Light Grey RAL 7035 |
Silver Grey RAL 7001 |
|||||||||
| 8 Holes  |
Short Thread |
M20x1.5 | MG20A-H8-01-ST | B | G | SG | 1.5-1 | 20 | 20-20.3 | 10 | 27/27 | 50 |
| MG20A-H8-02-ST | B | G | SG | 2.8-2 | 20 | 20-20.3 | 10 | 27/27 | 50 | |||
| M25x1.5 | MG25AS-H8-01 | B | G | SG | 1.5-1 | 25 | 25-25.4 | 12 | 33/27 | 50 | ||
| MG25AS-H8-02 | B | G | SG | 2.8-2 | 25 | 25-25.4 | 12 | 33/27 | 50 | |||
| MG25A-H8-03-ST | B | G | SG | 3.6-2.6 | 25 | 25-25.4 | 10 | 33/33 | 50 | |||
| MG25A-H8-04-ST | B | G | SG | 4.1-3 | 25 | 25-25.4 | 10 | 33/33 | 50 | |||
| MG25A-H8-05-ST | B | G | SG | 5.1-4.5 | 25 | 25-25.4 | 10 | 33/33 | 50 | |||
| M32x1.5 | MG32AS-H8-03 | B | G | SG | 3.6-2.6 | 32 | 32-32.4 | 12 | 41/33 | 10 | ||
| MG32AS-H8-04 | B | G | SG | 4.1-3 | 32 | 32-32.4 | 12 | 41/33 | 10 | |||
| MG32AS-H8-05 | B | G | SG | 5.1-4.5 | 32 | 32-32.4 | 12 | 41/33 | 10 | |||
| MG32A-H8-05-ST | B | G | SG | 5.1-4 | 32 | 32-32.4 | 11 | 41/42 | 10 | |||
| Long Thread |
M20x1.5 | MG20A-H8-01 | B | G | SG | 1.5-1 | 20 | 20-20.3 | 15 | 27/27 | 50 | |
| MG20A-H8-02 | B | G | SG | 2.8-2 | 20 | 20-20.3 | 15 | 27/27 | 50 | |||
| M25x1.5 | MG25A-H8-03 | B | G | SG | 3.6-2.6 | 25 | 25-25.4 | 15 | 33/33 | 50 | ||
| MG25A-H8-04 | B | G | SG | 4.1-3 | 25 | 25-25.4 | 15 | 33/33 | 50 | |||
| MG25A-H8-05 | B | G | SG | 5.1-4.5 | 25 | 25-25.4 | 15 | 33/33 | 50 | |||
| M32x1.5 | MG32A-H8-05 | B | G | SG | 5.1-4 | 32 | 32-32.4 | 15 | 41/42 | 10 | ||
| PG16 | PGA16-H8-01 | B | G | SG | 1.5-1 | 22.5 | 22.5-22.8 | 11 | 30/27 | 50 | ||
| PGA16-H8-02 | B | G | SG | 2.8-2 | 22.5 | 22.5-22.8 | 11 | 30/27 | 50 | |||
| PG21 | PGA21-H8-03 | B | G | SG | 3.6-2.6 | 28.3 | 28.3-28.7 | 12.5 | 36/33 | 50 | ||
| PGA21-H8-04 | B | G | SG | 4.1-3 | 28.3 | 28.3-28.7 | 12.5 | 36/33 | 50 | |||
| PGA21-H8-05 | B | G | SG | 5.1-4.5 | 28.3 | 28.3-28.7 | 12.5 | 36/33 | 50 | |||
| PG29 | PGA29-H8-05 | B | G | SG | 5.1-4 | 37 | 37-37.4 | 12 | 46/42 | 10 | ||
| G(PF) | 1/2 | FGA21L-H8-01 | B | G | SG | 1.5-1 | 20.955 | 21-21.2 | 10 | 27/27 | 50 | |
| FGA21L-H8-02 | B | G | SG | 2.8-2 | 20.955 | 21-21.2 | 10 | 27/27 | 50 | |||
| 3/4 | FGA26S-H8-01 | B | G | SG | 1.5-1 | 26.441 | 26.5-26.8 | 12 | 33/27 | 50 | ||
| FGA26S-H8-02 | B | G | SG | 2.8-2 | 26.441 | 26.5-26.8 | 12 | 33/27 | 50 | |||
| FGA26-H8-03 | B | G | SG | 3.6-2.6 | 26.441 | 26.5-26.8 | 12.5 | 33/33 | 50 | |||
| FGA26-H8-04 | B | G | SG | 4.1-3 | 26.441 | 26.5-26.8 | 12.5 | 33/33 | 50 | |||
| FGA26-H8-05 | B | G | SG | 5.1-4.5 | 26.441 | 26.5-26.8 | 12.5 | 33/33 | 50 | |||
| 1 | FGA33S-H8-03 | B | G | SG | 3.6~2.6 | 33.249 | 33.3-33.6 | 12 | 42/33 | 10 | ||
| FGA33S-H8-04 | B | G | SG | 4.1-3 | 33.249 | 33.3-33.6 | 12 | 42/33 | 10 | |||
| FGA33S-H8-05 | B | G | SG | 5.1-4.5 | 33.249 | 33.3-33.6 | 12 | 42/33 | 10 | |||
| FGA33-H8-05 | B | G | SG | 5.1-4 | 33.249 | 33.3-33.6 | 15 | 42/42 | 10 | |||
| NPT 1/2 | NPA21-H8-01 | B | G | SG | 1.5-1 | 21.223 | - | 13 | 27 | 50 | ||
| NPA21-H8-02 | B | G | SG | 2.8-2 | 21.223 | - | 13 | 27 | 50 | |||
| NPT 3/4 | NPA26-H8-03 | B | G | SG | 3.6-2.6 | 26.568 | - | 15 | 33 | 50 | ||
| NPA26-H8-04 | B | G | SG | 4.1-3 | 26.568 | - | 15 | 33 | 50 | |||
| NPA26-H8-05 | B | G | SG | 5.1-4.5 | 26.568 | - | 15 | 33 | 50 | |||
| NPT 1 | NPA33-H8-05 | B | G | SG | 5.1-4 | 33.227 | - | 17 | 42 | 10 | ||