进口可调双金属片式疏水阀（全世界都在用）德国莱克品牌

进口可调双金属片式疏水阀

德国莱克（LIK）原装进口可调双金属片式疏水阀的热敏元件为两种不同膨胀率的金属通过特殊工艺压铸一起的双金属片，双层金属片在受热后膨胀，由于不同的膨胀率使其产生的弯曲。利用这种特性制作成疏水阀的热敏元件起到开关作用。双金属片式疏水阀分为不可在线调节（BK，CS17H和CS47）和可在线调节（可调双金属片式TB）。
    Bimetallic Trap
The thermo-sensitive element of bimetallic trap is a bimetallic element cast through a special process by two metals of different expansion ratio.When the bimetallic element expands after heated,different expansion ratio results in bending.The thermo-sensitive element produced on the basis of this quality can act as a metallic Traps are divided into adjustable offline (BK,CS17H and CS47) and online (adjustable bimetallic element TB). 
        

优点：
1、排放温度可在线调整，安装姿势自由。
2、利用高温凝结水形成水封，有效减少蒸汽***。
3、动作灵敏，抗水击，无噪声，排空性能优良。
4、结构简单，容易维修***。
5、用于蒸汽主管、分汽缸、蒸汽伴热管线、散热器、低温加热槽、夹层锅等。
6、可以使用高压高温的蒸汽管线、分汽缸。
Merits
1.Discharge temperature adjustable online by free installation posture.
2.High-temperature condensate water used to form water seal so as to effectively reduce steam leakage.
3.Flexible and noiseless,water hammer resistant,and good emptying performance.
4.Simple structure,easy to maintain and repair.
5.Adoptable for steam main pipes,gas distribution cylinders,steam tracing pipes,radiators,low-temperature heating trough,double layered pots and so on.
6.Adoptable for high-temperature steam pipes,gas distribution cylinders and so on.
性能
可调整凝结水的排放温度，有效利用凝结水的显热。
阀前始终有凝结水，形成水封，无蒸汽泄漏。
可任意角度安装，并随时可调整排水温度。
合金球面阀芯与不锈钢阀座耐冲蚀，使用寿命长。
Performance
Capable of adjusting the discharge temperature of condensate water so as to make effective use of its sensible heat.
Existing condensate water in front of the valve to form water seal to prevent steam leakage.
Capable of installation in any direction and water discharge temperature adjustable at any time.
Long durability thanks to washing and corrosion resistant alloy sphere valve core and stainless valve seat.

可调双金属片式疏水阀/BIMETALLIC TRAP WITH ADJUSTABLE TEMPERATURE

主要零件材料/The materials of primary accessories