在运转200~300小时后，应进行换油，在以后的使用中应定期检查油的质量，对于混入杂质或变质的油须及时更换。一般情况下，对于长期连续工作的减速机，按运行5000小时或每年一次更换新油.
After running for 200~300 hours， the first oil change should be done. The quality of the oil should be checked regularly in later use， and the oil mixed with impurities or deterioration must be changed in time. In general，reducer生产， for a long-term continuous working reducer， new oil is replaced at 5000 hours or once a year.
对减速机箱体进行共振测试，找出共振位 置，增加适当的筋条（板），可以提高箱体的刚度，白城reducer，减少箱体的振动，实现降噪。多级传动时要求瞬时传动比的变化尽量小，以保证传动平稳，冲击及振动小，reducer购买，噪声低。
By testing the resonance of the reducer box， finding out the resonance and adding appropriate ribs (plates)，reducer报价， the stiffness of the box can be increased， the vibration of the box can be reduced and the noise can be reduced. In multistage tran***ission， the change of instantaneous tran***ission ratio should be as ***all as to ensure stable tran***ission， low impact and vibration， and low noise.
允许输入法兰：
不能大于或小于临级减速机的标准尺寸，如减速机PLE80?的标准法兰为80mm，其临级的减速级是PLE60?和PLE120，PLE80?允许法兰不应小于60mm，也不能大于120mm。
Allow input flange
It can"t be greater than or less than the standard of the reducer. For example， the standard flange of reducer PLE80 is 80mm， and the deceleration stage of its reducer is PLE60? PLE120， PLE80? The maximum allowable flange should not be less than 60mm， nor greater than 120mm.
reducer购买-白城reducer-圣霖国际【客户至上】由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（）是从事“型材设备,轧钢设备,轨道设备”的企业，公司秉承“诚信经营，用心服务”的理念，为您提供优质的产品和服务。欢迎来电咨询！联系人：王秋。