楔键联接：键的上下两表面是工作面，圣霖联接机购买，键的上表面和轮毂键槽底面均有1∶100的斜度，装配后，键即楔紧在轴和轮毂的键槽里，工作表面产生很大预紧力。
Wedge key connection: the upper and lower two surfaces of the key are the working faces. The upper surface of the key and the bottom of the hub keyway h***e 1 to 100 slope. After assembly，圣霖联接机价格， the key is wedged tightly in the keyway of the shaft and hub，圣霖联接机， and the working surface has a large pre tightening force.
型面联接：是利用非圆剖面的轴与相应形状的零件的毂孔配合而构成的联接，作为机械传动中的联接方式，圣霖联接机采购，型面联接相对于传统的键联接相比，具有联接强度高，没有应力集中，可以传递大扭矩且效率高的同时也可以承受冲击载荷，并且对于一些大型机械装备来讲其拆装方便及维修便利。
is the hub hole type surface connection: the non-circular section axis and the corresponding shape parts with a connection， as the connection mode in mechanical tran***ission， compared with the traditional linkage type surface connection compared with connecting strength， no stress ， can large torque and high efficiency at the same time it can withstand the impact load， and for some large mechanical equipment for its disassembly and convenient maintenance.
我们聊聊在机械设计中，我们必须掌握的有关轴毂联接的知识！轴毂联接是轴毂与轴相连接的轴上零件，常见齿轮、带轮等。联接使回转零件在轴上***和固定，以便传递运动和动力。
We talk about the mechanical design， we must master the knowledge about the shaft hub connection. Shaft hub connection is the axle hub and shaft connected to the shaft parts， common gear， belt wheel， and so on. The connection enables the rotating parts to be and fixed on the axis to tran***it motion and power.
圣霖联接机采购-圣霖联接机-圣霖国际【客户至上】由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（）是辽宁 鞍山 ,行业专用设备的翘楚，多年来，公司贯彻执行科学管理、创新发展、诚实守信的方针，满足客户需求。在圣霖国际***携全体员工热情欢迎各界人士垂询洽谈，共创圣霖国际更加美好的未来。