薄板：锯削时尽可能从宽面锯下去，若必须从窄面锯下时，可用两块木垫夹持，连木块一起锯下，也可把薄板直接夹在虎钳上，用手锯作横向斜推锯，使锯齿与薄板料接触的齿数增加，避免锯齿崩裂。
Thin plate: sawing as far as as wide as when sawing. If must be sawed from narrow surface， it can be held by two wooden blocks and sawed together with wooden blocks. The sheet can be clipped directly to the vise，沈阳fastener， and a hand saw is used as a transverse oblique saw to increase the number of teeth contacted with the sheet material and ***oid the crack of the saw teeth.
手锯锯削的注意事项
锯条的松紧要合适，且锯割时压力不能太大，以防折断伤人；
当锯缝歪斜时，不可急于纠正，而需要慢慢地逐步纠正。
Notice of hand saw cutting
The tightness of the saw blade should be suitable， and the pressure should not be too large during sawing， so as to prevent breaking and hurting people.
When the SAW seam is skewed，fastener厂家， it can not be corrected in a hurry， but it needs to be corrected gradually.
增设强压功能。即对卸料镶块压料部加厚尺寸(正常的卸料镶块厚H 0.03mm)，以增加对凹模侧材料的压力，从而***冲切时冲压件产生翻料、扭曲变形。
Additional pressure function. In order to increase the pressure on the material of the die side， the pressure of the material in the die side is increased by the thickness of the material of the unloaded insert (normal unloaded insert thickness H 0.03mm)， so as to suppress the turning and distortion of the stamping parts.
fastener厂家-圣霖国际-沈阳fastener由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（）在行业专用设备这一领域倾注了无限的热忱和热情，圣霖国际一直以客户为中心、为客户创造价值的理念、以品质、服务来赢得市场，衷心希望能与社会各界合作，共创成功，共创辉煌。相关业务欢迎垂询，联系人：王秋。