在南京SKF轴承运行过程中，轴承再次要求精度高、性能好。轴承润滑方法分为润滑脂、润滑脂和润滑脂。为了提高轴承的性能，务须首先确定适合于使用条件和使用的滑动方法。如果你只考虑油腻，油腻和奶油占主导地位。
During the operation of SKF bearings in Nanjing, the bearings require high accuracy and good performance again. Bearing lubrication methods are divided into grease, grease and grease. In order to improve the bearing performance, it is necessary to first determine the sliding method suitable for use conditi*** and use. If you only c***ider greasy, greasy and cream dominant.
当南京SKF轴承达到其终使用日期时，应更换。虽然轴承不能重复使用，但准确去除原有轴承，及时更换掉旧轴承，对延长新轴承的使用寿命具有很好的效率作用。
When Nanjing SKF bearing reaches its final use date, it should be replaced. Although the bearing can not be reused, but the accurate removal of the original bearing, timely replacement of the old bearing, to extend the life of the new bearing has a very good efficiency.
首先，对南京SKF轴承不够完善的零件（非对称）的尺寸进行足够准确测量，计算出适量磨料量（成品尺寸偏离时的磨料量）M。然后，中点偏差（在增加缺点颗粒中磨料颗粒的量的方向）结束。较大偏差为m／2，即计算缺点零件的相位。磨削是提高磨削用量的关键。
Firstly, the dimension of parts (asymmetric) with imperfect Nanjing SKF bearings is measured accurately enough, and the appropriate abrasive quantity (abrasive quantity when the finished product size deviates) M is calculated. Then, the midpoint deviation (in the direction of increasing the amount of abrasive particles in the defective particles) ends. The larger deviation is m / 2, that is to calculate the phase of the defective parts. Grinding is the key to improve grinding c***umption.
南京SKF轴承套圈的磨削操作基准是内径或外径，即先磨削内径（外径），再磨削滚道。以内圈为例，如果内滚道不对称，则需要准确测量零件的内径，并计算内滚道失效时的较大磨损M和较大磨损M 1。当M1＜m时，内径磨削时需要内圈的中点偏差，较大偏差M1/2，即先磨削内滚道缺点，再磨削内滚道缺点，从而节约浪费。当M1等于m时，异常磨削不能磨损。根据情况，我们可以使用（1）节声明方法来保存。
Nanjing SKF bearing ring grinding operation benchmark is inner diameter or outer diameter, that is, first grinding inner diameter (outer diameter), then grinding raceway. Taking the inner ring as an example, if the inner raceway is not symmetrical, it is necessary to measure the inner diameter of the parts accurately, and calculate the larger wear M and the larger wear M 1 when the inner raceway is invalid. When M1 < m, the midpoint deviation of inner ring is needed in inner diameter grinding, and the larger deviation M1/2, that is, the shortcomings of inner raceway are grinded first, and then the shortcomings of inner raceway are grinded, thus s***ing waste. When M1 equals m, abnormal grinding can not wear. According to the situation, we can use the (1) section declaration method to s***e.
偏心磨损是通过确保零件的硬度和渗碳层的较为严格的层次来实现的。在一次偏差磨削中不能达到总偏差。将同一磨削过程划分为多个磨削周期，即通过重复工艺偏差试验-磨削-测量-调度偏差-再磨削过程。新布置，异常磨削，变椭圆度。这种方法效率低，要求操作人员具有较高的技术水平，但单次交货成功率高，交货时间不延迟。经过多年的实践证明，该方法是真实可行的。
Eccentric wear is achieved by ensuring the hardness of parts and the stricter layers of carburized layers. The total deviation can not be achieved in one deviation grinding. The same grinding process is divided into several grinding cycles, that is, through repeated process deviation test-grinding-measuring-scheduling deviation-re-grinding process. New layout, abnormal grinding, variable ellipticity. This method is inefficient and requires operators to h***e high technical level, but the single delivery success rate is high, delivery time is not delayed. After years of practice, it is proved that the method is feasible.
文章来自：南京SKF轴承 www.wh-
The article is from: Nanjing SKF bearing www.wh-
文章来自：南京INA轴承 a-
The article is from: Nanjing INA bearing a-
文章来自：南京NSK轴承
The article is from: Nanjing NSK bearing
***：524085168
电话：0510-81207777
手机：13311666672