产品介绍/PRODUCTS
JGZYM08S石材机械磨边机采用一套人工智能操作的控制系统，各个机械动作由电脑编写程序进行操控，通过人机界面与操作人员进行交流设定，和自动检测系统提供信号，机台共设定2套程序具有针对性的进行实施操作分别为花岗岩、大理石程序、工作时只要切换程序即可，可做到有石材时抛光系统自动工作，没石材时自动停止工作。门个抛光磨轮可以根据磨料磨损的程度不同进行自动补偿，有效保证抛光效果连续又一致。避免我工补偿带来的繁杂工作量，直到抛光轮用完操作系统会提醒进行更换，再通过一键磨轮更换功能进行下降更换，人性化的功能和技能化的操作是本设备***多的特点。
JGZYMO8S Stone machinery mitting machine control system uses a set of artificial intelligenca operati***. all machines movementsare controlled by the computer pregram, through the human-machine interface to communicate with the operator set，and provides,automatic deetection system signals, the machine were set 2 programs targeted for inpiementation Granite, marble,respectively the program at work as long as the switch progcam to can be achieved whtn there is a stone pllishing system works automaticaliy, not automatically when the stone stops working Six wheels for polishing automatic compensation can be different according to the degree of abrasive wear effectively guarantee the effective continuous and c***istent ***oid the compiexity of artificial compensation workload whtil the operating system is polished wheeis will remind ceplaced wheels replacedd by a key function for drop replacement，human capabilitles and skills of operation of this device isthe most characteristic.
本产品是我司新研发的又一代经济实用的热销产品，为广大客户解决了磨边抛光成本高，品质难以提升的一大难题，新一代产品加工速度是原来加工方式的5倍左右。
异形石材磨边抛光机的主要功能：可加工圆弧边、鸭嘴边，法国边，各种造型窗台边、楼梯子（磨边抛光和开防滑槽一起同加工）等各种工艺。
The variable-frequency adjustable-speed feed suitable for disserent sizes and thickness of flat stone and 45 degree angle grinding stright edge bottom edge，rough grinding polishing all at once adjustment of different thickness， (please refer to the digital readout on the frontbeam adjustment)，it has advantages of advanced structure,high accuracy,ease of operation,adcantages of continuous processing of the samethickness，is essential equipment for stone processing.
佛山市中升机械有限公司，致力于石材线条机等产品的生产及出售。
今天，石材线条机厂家就来和大家谈谈，做石英石加工时必须注意的事项。
石英石因为硬度太高，所以他的可塑性就是没有人造石那么强的，加工技术也高于人造石。
以下内容本厂告诉大家加工石英石时必须注意的事项：
①接驳：石英石接驳一般采用45度拼接。当进行平接时，必须先将接驳面用锣直，对接无缝方可进行接驳，另接驳前必须先小试胶水颜色，颜色没问题后方可进行大接。接驳口处剩余的胶水在凝胶后但没硬之前用小刀片铲除掉，当胶水完全硬化后再进行打磨，打磨范围不宜扩大。石英石接驳好后拼接处一般会有如线一样的痕迹，不过不仔细看是不容易看到的，而且也不影响美观。
