德国SYNCHROFLEX AT型 高性能齿形
德国SYNCHROFLEX 聚氨酯同步带T型齿面的进一步发展，形成了 AT 齿型。这种皮
带具有较大体积的齿形和更强的抗拉层，从而产
生了较大的抗剪切强度。
SYNCHROFLEX AT型齿其他优势：
• 凸齿啮合良好
• 高强度抗拉层
• 与 T 型齿型相比，性能提高达 50%
• ***的运动传输，外加同步带轮，减小了齿隙
或无齿隙
• 减少啮合冲击
• 驱动装置尺寸紧凑
（第三代也具有此优势）
AT High capacity profile
Further development of the T profile resulted in
the AT profile. This type of belt is characterised
by the larger tooth shear strength resulting from
the larger tooth volume and the stronger tension
members.
Further advantages:
• f***ourable tooth mesh
• strengthened tension members for c***tant
pitch
• Improved performance up to 50% as com-
pared to the T profile
• precise tran***ission of movement in conjunc-
tion with synchronous pulleys with reduced
or zero backlash
• reduction of meshing impacts or shocks
• compact drive dimensi***
(also ***ailable in the GEN III version)
CONTI® SYNCHROFLEX T型 标准齿形
按照 DIN 7721，具有梯形齿型的同步带被视为是
典型的标准同步带。
德国原装进口SYNCHROFLEX T型齿同步带适用于以下应用：
• 标准驱动任务
• 双面皮带传输任务
• 弯曲应力大
• 回折传动
T Standard profile
The timing belt with a trapezoidal profile accord-
ing to DIN 7721 is regarded as the classical
standard timing belt.
Preferred use:
• for standard drive tasks
• tran***ission tasks with double-sided belts
• for high bending stress
• for drives with contraflexure
德国原装进口SYNCHROFLEX T型 双面齿形聚氨酯同步带
DL 同步带（双面）用于动力传输和交通技术。利
用此同步带可以实现不同旋转方向的多轴驱动。
两个齿侧都可以满载。
in DL version
The DL timing belt (the belt is double-sided) is
used in the power tran***ission and transport
technology. Multiple-shaft drives with different
rotational directi*** can be realised with this tim-
ing belt. Full load ability on both tooth sides.
德国原装进口SYNCHROFLEX英制齿型聚氨酯同步带
根据DIN/ISO 5296，英制节距可用于以下尺寸：
M (MXL) = 2.032 mm
适用于：
• 英制单位应用
Imperial profile
Imperial pitches according to DIN/ISO 5296
are ***ailable in the following size:
M (MXL) = 2.032 mm
Preferred use:
• Applicati*** in imperial units
德国原装进口SYNCHROFLEX K型 高精密公制锯齿型
适用于：
• 机械工艺好，要求尺寸小，精密要求高，空间狭小
K Serrated metric pitch profile.
Preferred use:
• Fine mechanical technology requiring
***all dimensi***
