安装前，将电机输入轴、***凸台及减速机连接部位的防锈油用***或锌钠水擦拭净。其目的是保证连接的紧密性及运转的灵活性，并且防止不必要的磨损。
Before installation, the anti rust oil of the motor input shaft, the positioning protruding platform and the connecting part of the reducer is cleaned with gasoline or zinc sodium water. The purpose is to ensure the tightness of the connection and the flexibility of the operation, and to prevent unnecessary wear.
旋紧紧力螺栓。所有紧力螺栓均需用力矩板手按标明的固定扭力矩数据进行固定和检查。减速机与机械设备间的正确安装类同减速机与驱动电机间的正确安装。关键是要必须保证减速机输出轴与所驱动部分轴同心度一致。
Tighten tight bolt. All tight bolts must be fixed and checked with the fixed torque data marked by the torque plate hand. The correct installation between the reducer and the mechanical equipment is the same as that between the reducer and the driving motor. The key is to ensure that the output shaft of the reducer is c***istent with the of the drive shaft.