在安装时，严禁用铁锤等击打，防止轴向力或径向力过大损坏轴承或齿轮。一定要将安装螺栓旋紧之后再旋紧紧力螺栓。
At the time of installation, it is strictly prohibited to use a hammer, such as a hammer, so as to prevent the axial or radial force from damaging the bearing or gear. It is necessary to tighten the bolt when the bolt is tightened.
减速机性能特点
1,产品采用模块化设计,电动机输入,输入轴和孔类型三个方面,并配置脚,法兰安装,适用于各种有效的减变速传动,可以直接取代无级调速,摆线。
2、能源消耗低、噪音低、振动小,减速机效率高达96%。
3,使用特殊的宽带宽压力电动机,当加载在20 hz - 60赫兹频率范围内正常使用。
4、齿轮渗碳淬火热处理工艺,采用独特的低噪声齿齿形设计,确保产品的使用寿命。
Performance characteristics of reducer
1, the product adopts modular design, motor input, input shaft and hole type three aspects, and equipped with feet, flange installation, suitable for all kinds of effective variable speed tran***ission, which can directly replace stepless speed regulation and cycloidal.
2, the energy c***umption is low, the noise is low, the vibration is ***all, and the efficiency of the reducer is up to 96%.
3, the use of a special wide band wide pressure motor when loaded in the range of 20 Hz - 60 Hz is normally used.
4, gear carburizing and quenching heat treatment process, using a unique low noise tooth profile design to ensure the service life of the product.
减速机内部齿轮精度等级 设计减速机时，设计者往往从经济因素考虑，尽可能比较经济的确定齿轮精度等级，忽略精度等级是齿轮产生噪声与侧隙的标记。
When the reducer is designed in the gear precision grade of the reducer, the designers often c***ider the economic factors as much as to determine the gear precision level as much , and ignore the precision grade as the mark of the gear noise and the backlash.