减速机内部齿轮齿形修整（修缘和修根）和齿顶倒角 将齿顶的齿形切削成比正确的渐开曲线略呈凸形。当齿轮齿面受外力产生变形时，可以避免对与之啮合的齿轮产生干涉，并且可以降低噪音，reducer报价，延长齿轮寿命。
The internal gear of the reducer is trimmed (trim and trim) and tooth top chamfering to make the tooth shape of the tooth top convex than the correct involute curve. When the gear tooth surface is deformed by external force， it can ***oid interference to the gears engaged with it，长春reducer， and can reduce noise and prolong the service life of gears.
在运转200~300小时后，应进行换油，在以后的使用中应定期检查油的质量，对于混入杂质或变质的油须及时更换。一般情况下，对于长期连续工作的减速机，按运行5000小时或每年一次更换新油.
After running for 200~300 hours， the first oil change should be done. The quality of the oil should be checked regularly in later use， and the oil mixed with impurities or deterioration must be changed in time. In general， for a long-term continuous working reducer， new oil is replaced at 5000 hours or once a year.
减速机内部齿面硬度 随着齿轮硬齿面技术的发展，其承载能力大、体积小、重量轻、传动精度高等特点使其应用领域日趋广泛。但为获得硬齿面采用的渗碳淬硬使齿轮产生变形，导致齿 轮传动噪声增大，寿命缩短。
With the development of hard tooth surface technology，reducer价格， the internal hardness of gear reducer has been widely used because of its large bearing capacity，reducer生产商， ***all volume， light weight and high tran***ission accuracy. But the carburizing and hardening used to obtain the hard tooth surface causes the deformation of the gear， which results in the increase of the noise of the gear tran***ission and the shortening of the service life.
reducer生产商-圣霖国际-长春reducer由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（）坚持“以人为本”的企业理念，拥有一支技术过硬的员工***，力求提供更好的产品和服务回馈社会，并欢迎广大新老客户光临惠顾，真诚合作、共创美好未来。圣霖国际——您可信赖的朋友，公司地址：辽宁省鞍山市高新区越岭路256号（研发中心A座2号楼510室至511室），联系人：王秋。