我们可以使用声传感器来防止镇江SKF轴承的尺寸和声音质量。即使轴承有轻微的剥落和损坏，异常和不规则的音调也可以***，所以使用麦克风可以停止***，发挥早期的防御作用。
We can use acoustic sensors to prevent the size and sound quality of SKF bearings in Zhenjiang. Even if the bearing is slightly flaked and damaged, abnormal and irregular tones can be restored, so the use of microphones can stop discrimination and play an early defensive role.
其次，轴承振动用于识别内省。
Secondly, bearing vibration is used to identify introspection.
轴承振动对轴承损坏非常。例如，在轴承振动测量中，可以反映轴承的剥落、压痕、腐蚀、开裂、磨损，所以可以使用专用的轴承振动计（频率解释器等）来推断振动幅度，从而推断出非常详细的环境。从频率分形。由于镇江SKF轴承的应用前提和传感器装置的位置，测量值是不同的。在预先比较每个机器的测量值之后，我们需要确定尺度。
Bearing vibration is very damaging to bearings. For example, in bearing vibration measurement, can reflect the bearing spalling, indentation, corrosion, cracking, wear, so you can use a dedicated bearing vibration meter (frequency interpreter, etc.) to infer the vibration amplitude, thus inferring a very detailed environment. From frequency fractal. Due to the application premise of Zhenjiang SKF bearing and the location of sensor device, the measured values are different. After comparing the measured values of each machine in advance, we need to determine the scale.
要考虑的是轴承的温度。
The temperature of the bearing should be c***idered.
轴承温度，如往常一样，可以从轴承室外温度推断，如果应用油孔可以间接测量轴承外圈温度，则更合适。
Bearing temperature, as usual, can be inferred from the bearing outdoor temperature, if the application of oil holes can be indirectly measured bearing outer ring temperature, then more appropriate.
在工作日内，镇江SKF轴承的温度随着工作逐渐升高，1-2小时后达到固态。轴承的异常温度是由机器的热容量、散热量、速度和负载引起的。如果它是光滑的和嵌合的，轴承的温度将急剧上升，并且温度将非常低。有必要停止跑步并采取必要的预防措施。根据大量的试验数据，该表列出了各种机器发生轴承事件时外圈的平均温度，以供参考。因为温度受平滑度、速度、负载和环境的影响，所以表的中值仅显示近似的温度标度。该热传感器的应用可随时监测轴承的事件温度，当温度超过规定值或超过规定值时主动，避免镇江SKF轴承故障的发生。
During working days, the temperature of SKF bearing in Zhenjiang gradually increased with work and reached solid state after 1-2 hours. The abnormal temperature of the bearing is caused by the heat capacity, heat dissipation, speed and load of the machine. If it is ***ooth and chimeric, the temperature of the bearing will rise sharply and the temperature will be very low. It is necessary to stop running and take necessary precauti***. According to a large number of test data, the table lists the ***erage temperature of the outer ring when bearing events occur in various machines for reference. Because the temperature is affected by ***oothness, speed, load and environment, the median value of the table shows only the approximate temperature scale. The application of the thermal sensor can monitor the event temperature of the bearing at any time. When the temperature exceeds the prescribed value or exceeds the prescribed value, it can take the initiative to ***oid the occurrence of Zhenjiang SKF bearing fault.
主轴轴承油是一种常用机床润滑油及类似设备。它对保证主轴的精度和应用功能，延长其使用寿命起着非常重要的作用。它也被称为轴承油。
Spindle bearing oil is a common machine tool lubricating oil and similar equipment. It plays a very important role in ensuring the accuracy and application function of spindle and prolonging its service life. It is also known as bearing oil.
为了使机床主轴温度不太高，引起机床的热变形，影响轴承加工精度或平滑变形，根据螺纹油嘴的布置选择合适的平滑温度。ZLE。ZLE。ZLE。油。环、转速和镇江SKF轴承间隙要求良好的粘性温度特性，以避免由于主轴温度和主轴条件而导致主轴温度的主要变化。变化程度过大，不影响其平滑功能。
In order to make the spindle temperature of the machine tool not too high, causing the thermal deformation of the machine tool, affecting the bearing processing accuracy or ***ooth deformation, according to the arrangement of the thread oil nozzle to choose the appropriate ***ooth temperature. ZLE. ZLE. ZLE. Oil. Ring, rotational speed and Zhenjiang SKF bearing clearance require good viscous temperature characteristics to ***oid major changes in spindle temperature due to spindle temperature and spindle conditi***. The degree of change is too large to affect its ***oothing function.
文章来自：镇江SKF轴承 www.wh-
The article is from: Zhenjiang SKF bearing www.wh-
文章来自：镇江INA轴承 a-
The article is from: Zhenjiang INA bearing a-
文章来自：镇江NSK轴承
The article is from: Zhenjiang NSK bearing
***：524085168
电话：0510-81207777
手机：13311666672