五金冲压件应用领域
汽车行业的冲压。以拉深为主。在我国这部份主要集中在汽车厂、拖拉机厂、飞机制造厂等大厂，***的大型冲压拉深厂还未几见。
Application field of metal stamping parts
Stamping in the automobile industry. It is dominated by deep drawing. In China, this part is mainly conceated in automobile factories, tractor factories, aircraft manufactory and so on. Independent large stamping and drawing plants are not yet seen.
冲压件是靠压力机和模具对板材、带材、管材和型材等施加外力，使之产生塑性变形或分离，从而获得所需形状和尺寸的工件（冲压件）的成形加工方法。冲压和锻造同属塑性加工（或称压力加工），合称锻压。
Stamping is a forming and processing method for workpiece (stamping parts) by applying external force to plate, strip, pipe and profile by press and die to produce plastic deformation or separation. Stamping and forging belong to plastic processing (or pressure machining).
手锯加工方法
扁钢的锯削：在扁钢锯口处划一周圈线，分别从宽面的两端锯下，两锯缝将要结接时，轻轻敲击使之断裂分离。这样锯削，而且能较好地防止锯齿崩缺。反之若从窄面下锯，非但不经济，而且只有很少的锯齿与工件接触，工件越薄，锯齿越容易被工件的棱边钩住而折断。
Processing method of hand saw
Sawing of flat steel: a circular line at the cutting edge of flat steel, which is cut down from the two sides of the wide surface. When the two saws will be tied, it will be gently tapped and broken apart. The sawing efficiency is high, and the sawtooth collapse is prevented. On the , if it is sawed under the narrow face, it is not economical, and only a few teeth are touched with the workpiece. The thinner the workpiece is, the more easily the sawtooth is caught and broken by the edges and edges of the workpiece.
薄板：锯削时尽可能从宽面锯下去，若必须从窄面锯下时，可用两块木垫夹持，连木块一起锯下，也可把薄板直接夹在虎钳上，用手锯作横向斜推锯，使锯齿与薄板料接触的齿数增加，避免锯齿崩裂。
Thin plate: sawing as far as as wide as when sawing. If must be sawed from narrow surface, it can be held by two wooden blocks and sawed together with wooden blocks. The sheet can be clipped directly to the vise, and a hand saw is used as a transverse oblique saw to increase the number of teeth contacted with the sheet material and ***oid the crack of the saw teeth.