与平键联接比较，花键联接在强度、工艺和使用方面有下列特点：在轴上与毂孔上直接而均匀地制出较多的齿与槽，故联接受力较为均匀；因槽较浅，齿根处应力集中较小，轴与毂的强度削弱较少。
Compared with the flat bond connection，联接机设备， the spline connection has the following characteristics in strength，联接机厂家电话， process and use.More teeth and grooves are made directly and evenly on the shaft and hub hole，联接机哪里有， so the joint force is more uniform.
Because of the shallow groove，联接机， the stress at the root of the tooth is ***all， and the strength of the shaft and hub is weakened less.
装夹过程及工作原理。钳台底座在设备工作台上固定好后，先调整可调钳口座在钳体底座上的位置，确保装夹行程内能有效对工件进行装夹；再将待加工产品置于柔性虎钳的两个钳口之间。
Clamping process and working principle. When the clamping platform is fixed on the equipment worktable， the of the adjustable jaw seat on the base of the clamp body is adjusted first， so as to ensure that the workpiece can be clamped effectively in the clamping stroke， and then the processed product is placed between the two jaw openings of the flexible vice.
一个切向键只能传递一个方向的转矩，传递双向转矩时，须用互成120°～130°角的两个键。用于载荷很大，对中要求不严的场合。由于键槽对轴削弱较大 ，常用于直径大于100mm的轴上。
A tangent key can only transfer the torque of one direction. When the two-way torque is passed， the two keys of 120 to 130 degrees are required. An occasion for he***y load and no strict requirement. As the keyway is greatly weakened to the axis， it is often used on a shaft with a diameter larger than 100mm.
联接机-圣霖国际【精益求精】-联接机哪里有由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（）为客户提供“型材设备,轧钢设备,轨道设备”等业务，公司拥有“圣霖”等品牌，专注于行业专用设备等行业。欢迎来电垂询，联系人：王秋。