齿轮减速机传动，耗能低，性能优越。摆线针轮减速机是一种采用摆线针齿啮合行星传动原理的传动机型，是一种理想的传动装置，具有许多优点，用途广泛，并可正反运转。
Gear reducer has high tran***ission efficiency, low energy cumption and superior performance. Cycloidal pinwheel reducer is a tran***ission type which adopts cycloid needle tooth meshing planetary tran***ission principle, and it is an ideal driving device. It has many advantages, widely used, and can run in reverse direction.
在安装时，严禁用铁锤等击打，防止轴向力或径向力过大损坏轴承或齿轮。一定要将安装螺栓旋紧之后再旋紧紧力螺栓。
At the time of installation, it is strictly prohibited to use a hammer, such as a hammer, so as to prevent the axial or radial force from damaging the bearing or gear. It is necessary to tighten the bolt when the bolt is tightened.
减速机与工作机的安装关系：为了避免工作机主轴挠曲及在减速机轴承上产生附加力，减速机与工作机之间的距离，在不影响正常的工作的条件下应尽量小，其值为5-10mm。
The relatihip between the reducer and the working machine is: to ***oid the additional force of the spindle and the additional bearing on the reducer bearing, the distance between the reducer and the working machine should be as ***all as sible without affecting the normal working conditi, and its value is 5-10mm.
减速机内部齿轮宽度 在减速机传动空间允许时，增加齿轮宽度，可以减少恒定扭矩下的单位负荷。降低轮齿挠曲，减少噪声激励，从而降低传动噪声。
The width of the internal gear of the reducer can be increased when the tran***ission space of the reducer is allowed, so that the unit load under ctant torque can be reduced. Reduce gear deflection, reduce noise excitation, thereby reducing tran***ission noise.