400G吸料机

◎     体积小、重量轻，可直接放置在干燥机或其他原料容器上，完成自动上料工作。
◎     微电脑操作控制程序。
◎     过载、缺料报警。
◎     300G采用高速整流马达，体积小、吸力强，适合用于新料输送。
◎     400G采用感应式高压风机，噪音小、寿命长。
◎     首创采用线控器控制，机台下即可设定、控制，方便、快捷。设有空气过滤器(可选件)。
◎     ***all footprint&light,to be placed directly on other machineor container for auto loading.
◎     Microcomputer controlled.
◎     Alarm for overload and lack of material.
◎     High-speed rectificative motor of ***all footprint and strongsuction force for new material for AL-300G.
◎     Induction high-pressure pump of low noise and long servic timeforAL-400G.
◎     Cable-contrlo,easy to set and control.
◎     Filter ***ailable.
◎     参数中的输送能力及吸料扬程是以SBS原料为测试材料得出的数据，实际参数根据塑料比重、形状及输送长度、高度、管路特性、参数设定等因素而改变。
◎     吸料机在输送热料时，料管需选配耐160度高温料管。
◎     The parameters of the conveying capacity and suction lift are educed from tests on ABS.The actual parameters may be different due to the differences of the specific gr***ity and the shape of the material,the conveying distance and height,the specialty of pipeline and the seting of parameters.
◎     Heat-resistant(160℃)pipes should be used when conveying hot material.