TNJ05 AX系列***万用强力机

AX Universal Strength Testing Machines

产地：英国 Testometric   Made in UK

UT250/350/500 AX ***万用强力机

Micro- AX***万用强力机及高性能测试仪，内置式微机，适用于***实验室。控制面板采用32位内嵌控制器，高分辨率平面图象显示，测力读数自动选程。

本机精度&plu***n;0.5%,测力传感器***高精度可达1/1000个单位。加载速率1000/s。全46键字母键盘，可存贮多达 100个测试方法并对数据进行***。

直接打印出A4或信纸测试报告，包括***测试结果、统计分析及测试曲线（不需额外微机）。测力传感器800％超载保护，自动识别功能，可选单位： N， kgf，lbf， mm和英寸。

丁字头运动显示读数可***至0.001mm，***丁字头位置可***至0.001mm。精密滚珠丝杠及引导系统、高精度闭环速度控制器、缓行装置及可选快速返程、微机RS232接口，定载及行程保护限制，即时负载及拉伸循环测试，长期蠕变测试。

数字控制试样***检测功能，自动返回无机械张力状态的测试位置，自动检测校准功能，冲击保护，可选自动复位，自动回零。

The Univeral Strength Testing Machine. Built-in computer, apply to senior laboratory. 32 control panel used embedded controllers, high-resolution image plane, measured reading of the automatic election process.

The accuracy of &plu***n; 0.5%, the most high-precision measurement of the sensor up to 1 / 1000 units. Loading rate 1000 / s. All 46 key keyboard letters, can be stored up to 100 tests and data recovery.

Direct print A4 or letter-test reports, including the independent test results, statistical analysis and testing curve (no extra PC). Force sensors 800% overload protection, automatic identification, optional units: N, kgf, lbf, mm and inches.

Three-way movement shows that the first reading can be accurate to 0.001 mm, the first Three-way location can be absolutely accurate to 0.001 mm. Precision ball screws and guidance systems, high-precision closed-loop speed controller, Postponed optional devices and rapid return, RS232 computer interface, will be contained and itinerary protection restricti***, immediate load and tensile test cycle, the long-term creep testing.

Digital control sample damage detection, automatically without mechanical tension to return to the state test location, automatically detect calibration, impact protection, optional automatic reduction, automatic back to zero.

技术参数Techniques

UT250-2.5(单臂Single Column) UT350-5       UT350-10      UT500-25      UT500-50 

量程Range                                         3.0kn                      5kn                 10kn               25kn              50kn     

                                                         300kg                     500kg             1000kg            2500kg           5000kg 

行程（不包括夹具长度）Tour (excluding fixture length) 

                     1100mm                   1100mm        1100mm          1050mm          980mm 

长Lenght                                        460mm                   770mm           770mm            910mm          910mm   

宽 Width                                      440mm                    450mm           450mm            500mm          500mm  

高 Height                                    1590mm                  1590mm         1590mm          1620mm        1620mm

工作截面Working section            100mm                    295mm           295mm           420mm          420mm   

速度范围 Speed Range    0.001-1000mm/min                   0.001-500mm/min 

返程速度                 500mm/min             500mm/min     1000mm/min   500mm/min    500mm/min 

重量Weight                                     43kg                       95kg               115kg            190kg               235kg

   标准Standa***

        BS EN10002-2   ASTM E-4   BS 1606/0.5   AFNOR A03-501    DIN 51221/1  M&S P11,P12,P13,P14,P14A P98,P115