旋紧紧力螺栓。所有紧力螺栓均需用力矩板手按标明的固定扭力矩数据进行固定和检查。减速机与机械设备间的正确安装类同减速机与驱动电机间的正确安装。关键是要必须保证减速机输出轴与所驱动部分轴同心度一致。
Tighten tight bolt. All tight bolts must be fixed and checked with the fixed torque data marked by the torque plate hand. The correct installation between the reducer and the mechanical equipment is the same as that between the reducer and the driving motor. The key is to ensure that the output shaft of the reducer is cistent with the of the drive shaft.
减速机性能特点
1,产品采用模块化设计,电动机输入,输入轴和孔类型三个方面,并配置脚,法兰安装,适用于各种有效的减变速传动,可以直接取代无级调速,摆线。
2、能源消耗低、噪音低、振动小,减速机达96%。
3,使用特殊的宽带宽压力电动机,当加载在20 hz - 60赫兹频率范围内正常使用。
4、齿轮渗碳淬火热处理工艺,采用独特的低噪声齿齿形设计,确保产品的使用寿命。
Performance characteristics of reducer
1, the product adopts modular design, motor input, input shaft and hole type three aspects, and equipped with feet, flange installation, suitable for all kinds of effective variable speed tran***ission, which can directly replace stepless speed regulation and cycloidal.
2, the energy cumption is low, the noise is low, the vibration is ***all, and the efficiency of the reducer is up to 96%.
3, the use of a special wide band wide pressure motor when loaded in the range of 20 Hz - 60 Hz is normally used.
4, gear carburizing and quenching heat treatment process, using a unique low noise tooth profile design to ensure the service life of the product.
减速机的种类：一般的减速机有斜齿轮减速机(包括平行轴斜齿轮减速机、蜗轮减速机、锥齿轮减速机等等)、行星齿轮减速机、摆线针轮减速机、蜗轮蜗杆减速机、行星摩擦式机械无级变速机等等。
Type of reducer
The general reducer has helical gear reducer (including parallel shaft helical gear reducer, worm gear reducer, bevel gear reducer, etc.), planetary gear reducer, cycloid pin reducer, worm gear reducer, planetary friction mechanical stepless speed change machine and so on.