为了从大量的结构和尺度中选择**合适的泰州INA轴承，有必要从多个角度对其进行讨论。在选择轴承时，一般认为轴承的布局、装置、拆卸难度、所希望的空间、尺寸和作为轴系的轴承市场决定了轴承的结构。
其次，在比较和讨论各种使用轴承的机器的计划寿命和轴承的不同耐久性极限的同时，确定了轴承的尺寸。在选择泰州INA轴承时，通常只考虑轴承的疲劳寿命。润滑脂老化引起的润滑脂的疲劳寿命、磨损和噪声也有很多讨论。此外，根据不同的用途，**须选择具有特殊规划的轴承，如精度、间隙、保持结构、润滑脂等。
Secondly, while comparing and discussing the planned life of various machines using bearings and the different durability limits of bearings, the dimensi*** of bearings are determined. When choosing INA bearings in Taizhou, the fatigue life of bearings is usually only c***idered. There are also many discussi*** on the fatigue life, wear and noise of lubricating grease caused by aging of grease. In addition, bearings with special planning, such as accuracy, clearance, retaining structure and grease, should be selected for different purposes.
一般来说，对于向心推力球轴承和滚子轴承，当成对使用时，**好使用具有较大外圈端面的设备（即由其压力线向外形成的压力锥形尖**），以提高泰州INA轴承承载能力。倾覆力矩的阻力较大。当温度变化时，设备的预载变化不大。
只要滚针轴承冲压外圈，因为外圈壁很薄，**好不要用锤装置，应该用压力机来压制。由于锤击过程中的压力不均匀，针轴承的外圈可以部分变形。
As long as needle roller bearings stamp the outer ring, because the outer ring wall is very thin,** Do not use hammer device, it should be pressed by press. Because of the uneven pressure during the hammering process, the outer ring of the needle bearing can be partially deformed.
所有能够接受至少一个轴向载荷的径向轴承都是合适的。它们包括深沟和角接触球轴承、圆锥滚子轴承和NJ圆柱滚子轴承。在角接触球轴承或圆锥滚子轴承的使用中，在某些情况下需要预加载。
All radial bearings that can accept at least one axial load are all suitable. They include deep groove and angular contact ball bearings, tapered roller bearings and NJ cylindrical roller bearings. In the use of angular contact ball bearings or tapered roller bearings, preloading is necessary in some cases.
它具有径向和轴向载荷，并且受固定轴和泰州INA轴承箱之间的相对轴向位移的影响。另一边称为**由端，只接受径向载荷。轴向运动可以相对移动。
更好的轴承是能够承受组合载荷的径向轴承，如深沟球轴承、自调心滚子轴承和双列或成对的角接触球轴承或圆锥滚子泰州INA轴承。接受简单径向载荷的径向轴承的组合，例如具有无肋内外环的圆柱滚子轴承、深沟球轴承或四点接触球轴承或双向推力轴承，也可以用作固定端轴承。
Better bearings are radial bearings that can withstand combined loads, such as deep groove ball bearings, self-aligning roller bearings and double row or paired angular contact ball bearings or tapered roller Taizhou INA bearings. Combinati*** of radial bearings that accept simple radial loads, such as cylindrical roller bearings with ribless inner and outer rings, deep groove ball bearings or four-point contact ball bearings or bi-directional thrust bearings, can also be used as fixed-end bearings.
文章来自：泰州SKF轴承 www.wh-
文章来自：泰州INA轴承 a-
文章来自：泰州NSK轴承
***：524085168
电话：0510-81207777
手机：13311666672/13395185757