进口泰州NSK轴承的工作状态直接影响到车辆的动力性和经济性。分析了进口轴承工作条件的六种简单测试方法。
The working condition of the imported NSK bearing in Taizhou directly affects the power and economy of the vehicle. Six simple testing methods for working conditi*** of imported bearings are analyzed.
（1）截油方法：当轴承怠速时，高压油管从燃油泵到喷油器一个接一个堵塞。同时，对进口轴承的转速和声响变化进行了研究。如果没有明显的变化，气缸的操作就会很差；如果有明显的变化，气缸的操作是非常好的。
(1) Oil cut-off method: when bearing idle speed, the high-pressure fuel pipe from the fuel pump to the injector one by one blocked. At the same time, the speed and the sound variation of imported bearings are studied. If there are no ***ious changes, the operation of the cylinder will be very poor; if there are ***ious changes, the operation of the cylinder is very good.
（2）温度传感方法：当泰州NSK轴承长期工作时，各气缸的排气歧管要接触。如果手柄的温度高，则意味着由于燃料供应量大或燃料供应提前角小，气缸的燃料消耗严重；如果手柄的温度低，则意味着气缸的燃料供应和燃烧量小。确保了N。不管它是否有*效果。
(2) temperature sensing method: when the NSK bearing in Taizhou works for a long time, the exhaust manifold of each cylinder should be contacted. If the temperature of the handle is high, it means that the fuel c***umption of the cylinder is serious because of the large fuel supply or the ***all advance angle of the fuel supply; if the temperature of the handle is low, it means that the fuel supply and combustion of the cylinder are ***all. N is ensured. No matter whether it has * effect.
(3)倾听方法：进口轴承时，用螺丝刀与主喷嘴体接触，倾听各缸的裂纹。如果爆燃强烈，气缸的燃料供应太大或太早；如果没有爆燃，气缸的燃料供应太小或太迟或不工作。
(3) listening method: when the bearing is imported, contact the main nozzle body with a screwdriver and listen to the cracks in each cylinder. If the deflagration is intense, the fuel supply of the cylinder is too large or too early; if there is no deflagration, the fuel supply of the cylinder is too ***all or too late or does not work.
（4）脉冲感知：在操作过程中，进口轴承与气缸分离。
(4) pulse perception: during operation, the inlet bearings are separated from the cylinders.
如果波动规律明显，油缸将明显工作；如果没有明显的波动，泰州NSK轴承油缸将工作**良；如果有波纹，但没有规律，油缸将***。
If the fluctuation law is ***ious, the cylinder will work ***iously; if there is no ***ious fluctuation, the Taizhou NSK bearing cylinder will work well; if there are ripples, but there is no regularity, the cylinder will break.
（5）检查烟：异常废气，通常分为三类，即黑色、蓝色和白色。如果废气异常，则各气缸运行异常；如果间歇性排气所述单缸运行异常，则可以去除各气缸的排气状态的排气分支。
(5) check the ***oke: abnormal exhaust gas, usually divided into three categories, that is, black, blue and white. If the exhaust gas is abnormal, the operation of each cylinder is abnormal; if the single cylinder operates abnormally with intermittent exhaust, the exhaust branch of the exhaust state of each cylinder can be removed.
（6）仪器维修人员可以使用进口轴承感应试验机检测和识别进口轴承的工作条件。
(6) Instrument maintenance personnel can use imported bearing induction testing machine to detect and identify the working conditi*** of imported bearings.
滚动轴承是生产大量机械零部件，并且制造精度要求非常严格，业内专一化程度非常高。因此，对于大多数泰州NSK轴承品种来说，更容易购买，而且应该比购买更具成本效益。只有在以下情况下才会考虑滚动轴承修理问题。
Rolling bearing is the production of a large number of mechanical parts, and the manufacturing accuracy requirements are very strict, the industry has a very high degree of specialization. Therefore, for most Taizhou NSK bearing varieties, it is easier to buy, and should be more cost-effective than buying. Only in the following cases will the rolling bearing repair problem be c***idered.
1。在大型工厂中使用了大量相同类型的轴承。轧制表面磨损、疲劳磨损和微动磨损的主要失效形式，特别是对保持架或轧体的损伤，以及环或垫圈仍具有固定值。
1. A large number of bearings of the same type are used in large factories. The main failure modes of rolling surface wear, fatigue wear and fretting wear, especially the damage to cage or rolling body, and ring or washer still h***e fixed values.
2。大型和超大型滚动泰州NSK轴承的边缘失效，或者已经失效，没有对轴承零件造成重大损坏，或者**须设法延长其使用寿命；
2. The edge failure of large and super-large rolling Taizhou NSK bearings has not caused significant damage to the bearing parts, or the service life of bearings has to be prolonged.
3。某些类型的轴承，特别是滚动轴承，**须在故障后修理，没有任何备件。
3. Certain types of bearings, especially rolling bearings, must be repaired after failure, without any spare parts.
4。滚动轴承在储存过程中受到轻微侵蚀。微动磨损在运输过程中很小，容易*修*复和丢弃。
4. Rolling bearings are slightly eroded during storage. Fretting wear is very ***all in transportation and easy to repair and discard.
文章来自：泰州SKF轴承 www.wh-
The article is from: Taizhou SKF bearing www.wh-
文章来自：泰州INA轴承 a-
The article is from: Taizhou INA bearing a-
文章来自：泰州NSK轴承
The article is from: Taizhou NSK bearing
***：524085168
电话：0510-81207777
手机：13311666672/13395185757