Model TFP-01: Test Finger Probe(IEC试验指),产地:美国 品牌:ED&D
| Model TPP-01: Short Test Pin Probe | |
|
Used to test accessibility through enclosure openings per IEC, EN, UL and CSA Standa***. Body is Delrin, tip is stainless steel.
NOTE: Don’t ever purchase an all plastic version - the tip is too narrow to maintain tip rigidity!
|
| Model TPP-02: Long Test Pin Probe | |
|
This pin is used on appliances for verifying that there is no access to hazardous live parts of heating elements which could be touched accidentally by a tool (i.e. screwdriver). Meets IEC & EN requirements. Body is Delrin, tip is stainless steel.
|
| Model UFP-01: Rigid Finger Probe | |
|
A “rigid” version of the International Test Finger, model TFP-01, (see next page). Used for force applicati*** on openings (i.e. vents) as required by IEC, EN, UL and CSA Standa***. Handle made of Delrin, rigid finger made of chrome plated steel.
|
| Model TRP-02: 1.0mm Test Wire | |
|
Used to verify protection of pers*** against access with a wire. Meets IEC and EN Standa*** including IEC 529 for IP4 and suffix D codes. The handle and stop face are made of Delrin. The wire is made of stainless steel.
|
| Model TRP-01: 2.5mm Test Rod | |
|
Used to verify the protection of pers*** against access to hazardous parts. Also used to verify the protection against access with a tool. Meets IEC and EN Standa*** including IEC 529 for IP3 and suffix C codes. The handle and stop face are made of Delrin. The rod is made of stainless steel.
|
| Model ***-01: 3.0mm Preset Controls Probe | |
|
Used to verify protection against access to hazardous parts by use of a tool through holes which give access to pre-set controls. Meets IEC, EN, UL and CSA Standa*** including IEC 1010, EN 61010-1, U- 3101-1, UL 3111-1 and CSA 1010-1. The handle and stop face are made of Delrin. The rod is stainless steel.
|
| Model HLP-01: 4.0mm Hazardous Live Parts Probe | |
|
Used to verify protection against access to hazardous parts through top openings. Meets IEC, EN, UL and CSA Standa*** including IEC 1010, EN61010-1, UL3101-1, and CSA 1010-1. The handle and stop face are made of Delrin. The rod is made of stainless steel.
|
| Model TFP-01: Test Finger Probe | |
|
|
This is the “International” test finger required by most IEC, EN and CSA Standa***, in addition to many UL Standa***. Built in strict accordance to the newest requirements - with integral palm simulator. This is the ONLY Finger Probe ***ailable with a integral jack in the handle for continuity testing - as mandated by the IEC CB Scheme. Finger made of chrome plated steel. All parts precision machined.
|
Model ULP-01: UL Finger Probe 
|
|
| This is the “UL” test finger, researched and designed by UL and required by most UL Standa***. Palm simulator and restricted joint movement simulates human finger movement. Made of all nylon. Bell-Core accessory ***ailable. | |
| Model ULP-02: Articulated Probe with Discs | |
|
|
Probe is required by GR-1089-CORE. Probe is plastic with 2 precision Delrin? disks. The disks are positioned at 35 mm. and 9 mm. from the top of probe. It is used to verify protection from hazardous parts.
|
| Model THN-01: Test Thorn Probe |
|
|
For testing accessibility in appliances with visibly glowing heating elements. Also for testing parts supporting such elements. Complies with IEC, EN, UL & CSA requirements. Made entirely of stainless steel.
|
| Model TSP-01: Test Sphere Probe | |
|
This probe is intended to verify protection of pers*** against access to hazardous parts for an IP1 Code. Also used to verify protection from access with the back of the hand for an IP suffix A code.
|
| Model TSP-02: Test Sphere Probe | |
|
This sphere is intended to verify the degree of protection of enclosures for an IP2 Code per IEC 529. Sphere is hardened steel with chrome finish.
|
| Model RTR-01: Rigidity Test Rod Probe | |
|
For testing enclosure rigidity in accordance with clause 8.1 of IEC 1010 and the EN, UL and CSA versi*** of this Standard. Handle is Delrin, tip is stainless steel.
|
| Model TUP-01: Uninsulated Live Parts Probe | |
|
|
For testing accessibility in accordance with many UL Standa***. The handle is Delrin and the tip is stainless steel.
|
| Model EWP-01: Enameled Wire Probe | |
|
For testing accessibility in accordance with many UL Standa***. In many Standa***, this probe is used for access to enamel coated wire (i.e. transformers and inductors). The handle is Delrin and the tip is stainless steel.
|
| Model HMP- 01: Hazardous Moving Parts Probe | |
|
For testing accessibility to hazardous moving parts such as access to fan blades through a fan finger guard. Complies with UL Standa***. Made entirely of stainless steel, weighs 1 lb.
|
| Model CP-01: Coin Probe | |
|
|
Four probes in one! Used to determine accessibility to shock haza*** in many household and audio/video products, including Standa*** UL 1410 and UL 6500. Made entirely of nickel-plated steel.
|
| Model TH-01: Test Hook Probe | |
|
|
Used on enclosures prior to accessibility testing. The test hook is “hooked” into vents and seams in the enclosure & then pulled with a force (usually 20N). The hook has a hole at its long end, for use in conjunction with a PFI series Force Gauge. Made entirely of stainless steel.
|
| Model FNP-01: Finger Nail Probe | |
|
For testing the requirement of snap-in devices and snap together enclosures that protect the user from accessibility to hazardous parts. Complies with most Standa*** including IEC 335 based Standa*** and UL 1025.
|
| Model BEP-01: Blunt-End Probe | |
|
Stainless steel probe required by various UL, CSA, IEC, and EN standa***.
|
| Model TTP-01:Telecom Test Probe | |
|
|
Required by IEC, EN, and some UL and CSA standa*** to test accessibility to TNV circuits (telecom). The handle and stop face are Delrin, the tip is stainless steel. |
美国.ED&D产品服务于:IBM ，美国航空暨太空总署，英代尔，苹果， NCR ，***公司，太阳，飞利浦公司，思科， AT&T ， Compaq ， JVC ， Hewlett-Packard ，摩托罗拉， Mattel ，戴尔,3 Com 等公司;专为UL ， CSA ， ETL ， TUV,Demko等试验室提供检测产品.