美国SCHOTT冷光源

CV系列 A20500 Download Sales Sheet ACE® Light Source Standard Features 1. Solid state dimmer for continuous control zero to full intensity. 2. He***y duty, grounded metal housing. 3. 115 or 230 input voltage versi*** ***ailable. 4. IR interference filter for cool illumination. 5. Full illumination on .60" active diameter input 6. Interchangeable Modulamp® Units offer 2 positi*** to maximize individual lamp efficiencies. 7. Choice of three, 150 watt halogen lamps - EJA, EKE, and DDL for intense, uniform illumination. A20560 Standard Features 1. He***y duty, grounded metal housing. 2. 115 or 230 input voltage versi*** ***ailable. 3. IR interference filter for cool illumination. 4. Full illumination on .60” active diameter input. 5. Solid state dimmer control. 6. Interchangeable Modulamp® Units offer 2 positi*** to maximize individual lamp efficiencies. 7. Choice of three, 150 watt halogen lamps - EJA, EKE, and DDL for intense, uniform illumination. 8. Built-in thermal shut down. A20800 Download Sales Sheet DCR® III Light Source DC regulated light source provides intense, cool illumination. Standard Features 1. DC-regulated light source limits light fluctuation to &plu***n; 0.5% due to line voltage variation. 2. Universal input voltage – accepts 90 to 265 VAC. 3. Current limiting – protects the unit from over heating due to defective and aging bulbs. 4. Transient protection – allows remote location of bulb. 5. Lamp change indicator light – LED located on front panel changes from green to red when lamp should be replaced. This is due to either an open or partially shorted filament. 6. Soft start “lamp s***er” circuitry. 7. IR interference filter for cool illumination. 8. Solid state dimmer control for continuous dimming. 9. Interchangeable Modulamp® Units offer 2 lamp positi*** to maximize individual lamp efficiencies. 10. Choice of three, 150 watt halogen lamps - EJA, EKE and DDL for intense, uniform illumination. 11. Can power the RS232 from the 9-pin connector. A20870 Download Sales Sheet Standard Features 1. DC-regulated light source limits light fluctuation to &plu***n; 0.5% due to line voltage variation. 2. Universal input voltage – accepts 90 to 265 VAC. 3. Current limiting – protects the unit from over heating due to defective and aging bulbs. 4. Transient protection – allows remote location of bulb. 5. Lamp change indicator light – LED located on front panel changes from green to red when lamp should be replaced. This is due to either an open or partially shorted filament. 6. Soft start “lamp s***er” circuitry. 7. IR interference filter for cool illumination. 8. Solid state dimmer control for continuous dimming. 9. Interchangeable Modulamp® Units offer 2 lamp positi*** to maximize individual lamp efficiencies. A20890 Download Sales Sheet DCR® IV Light Source DC regulated light source with integrated Equalizer™ light feedback to provide stabilized light output for the most demanding machine vision inspection applicati***. (See DCR® III Plus datasheet for base description.) Benefits 1. Stable lamp output over the life of the lamp and minimized lamp to lamp variation. 2. Remote controllable using integrated RS232 interface. Standard Features 1. Flexible - Two configurati*** ***ailable: A. DCR® IV used with a reference Modulamp® unit and off-the-shelf fiber optics, maintains DDL lamp output a &plu***n;2% over the life of the lamp and &plu***n;8% lamp to lamp. B. For even greater control, use the DCR® IV with fiber optic products that h***e an integrated reference bundle; special order only. This will maintain DDL lamp output and lamp to lamp variation within &plu***n;1%. 2. All of the features of the DCR® III Plus Light Source including control of up to three additional DCR® III light sources via an expansion cable. 3. LED’s located on the front panel indicate that the lamp intensity is stabilized. 4. Easy to use front panel controls for calibration and intensity control. 5. CSA certified to UL, CE compliant to low voltage and EMC directives. 6. Universal input voltage – accepts 90 to 265 VAC, 50/60 Hz. A20900 Standard Features 1. Color temperature of 6000K. 2. Twice the light output of DDL lamps. 3. Bulb lifetime of 3500 hours ***erage at 50W output. 4. Metal halide lamp specifically designed with highest uniformity. 5. Solid state dimmer control. 6. He***y duty, grounded metal housing. 7. Universal input voltage - accepts 90 to 265 VAC. 8. IR interference filter for cool illumination. 9. Full illumination on .50” active diameter input. 17. Detachable IEC cord. 18. CSA approved to UL spec, CE compliant. Mega 100 冷光源 Download Sales Sheet 灯： 100W卤素灯灯寿命： 1000小时（平均）照明强度： 650，000Lux 灯电压安定： Within +/-0.1%(Input Voltage Fluctuation +/-10%) 耗电量： 150W(350VA) 彩色过滤器： 一个容易可安装的彩色过滤器（可选择）外部尺寸： 120H 76W2350Dmm 彩色温度： 3100K 重量： 1.5KG