WEICON Plast-o-Seal ®
Permanently plastic universal sealant
Solvent free with no unpleasant odour enables immediate assembly
For sealing the ***ooth treated flanges of machine, gearbox and motor casing flanges.- To improve the performance of both old and new gaskets made from paper, cork, felt etc.
- Solvent free - odourless
- Remains permanently plastic, both before and after assembly.
- Easy joint di***antling.
Economical in use.- Very good resistance to most fuels, mineral oils, water, air, coolant mixtures based on methanol and glycol, antifreezes, kerosene, fluorocarbon refrigerants etc.
- Max. gap filling capability up to 0,1 mm (without a gasket).
- Non-sag can be applied to vertical surfaces.
- Temperature resistant from -50°C to +200°C briefly up to +250°C
Compensates for manufacturing defects such as scoring and scratches enabling accurate assembly.- Allows accurate assembly and c***truction with low tolerances.
- No need to overtighten fixings during assembly.
- Non corrosive
- Neither contains any substances that disturb lacquer wettings (e.g. silicone).
- Fluorescent blue colour.
Technical data:
- Temperature resistant: from -50°C up to +200°C, briefly up to +250°C
- Chemical base: polyester resin
- Viscosity: 950.000 up to 1.650.000 mPa•s
- Colour: blue (fluorescent)
Gap filling: max 0,10 mm without gasket- Working temperature: from +5°C up to +35°C.
- Specific weight: 1,12 g/cm³
- Shelf life: 24 months at room temperature (approx. +20°C)