lattice usb ***线

一、产品介绍

    ispDOWNLOAD***电缆适用于所有的Lattice器件进行在系统编程的硬件连接产品。用户通过 ispLEVER或 PAC-Designer 软件完成逻辑设计并生成编程文件后，Lattice的 ispVMTM System Software 软件即可直接在 PC上对器件进行编程。除***电缆外，不需要其他的元器件即可完成对器件的编程。

    该电缆支持对所有1.2 伏、1.8 伏、2.5 伏、 3.3 伏及 5.0伏核心电压器件的编程。

    ***器还不到一张名片大小，PVC磨砂塑胶封面，带电源和状态指示灯，高速USB2.0接口，配有丰富的延长线，适合于不同的接口定义，按Lattice并口10Pin标准接口定义设计的目标板可以直接使用我们配套的10Pin延长线来***，其它接口定义的目标板可以用配套的9针单根的杜邦线来***，接口定义在PVC封面和杜邦线上均有标示，可以方便的进行连接。

    一般***只需连接JTAG接口的TCK、TMS、***、TDO和VCC、GND这6个引脚即可，其余针脚为针对不同芯片的可选信号，具体可以查阅光盘里面的手册说明。

 Lattice's ispDOWNLOAD® Cable products are the ha***are connection for in-system programming of all Lattice devices. After completion of the logic design and creation of a programming file with the ispLEVERTM or PAC-DesignerTM software, Lattice's ispVMTM System Software is used to control the programming of devices directly on the PC board. No additional components are required to program a device.

Lattice's programming cables connect to either USB or PC Parallel ports, and use fly-wire connectors to the target system board for maximum flexibility. The cables also include adapters for easy interface to widely used 1x8 and 2x5 header configurati***. The cables support programming of all Lattice devices with 1.2V, 1.8V, 2.5V, 3.3V, 5.0V core voltages. Both cables are also RoHS Compliant.

产品清单：

关于质保：产品本身质量问题，3个月保换，两年免费维修。