|
The basic multipurpose epoxy compound for repair and rebuilding of deteriorated metal parts
- Wide range of applicati***
- Strong adhesion to all surfaces
- Low curing temperature
- Simple mixing and application
- Fully machinable
Wencon Cream is a basic two-component, epoxy compound with a wide range of applicati*** for repair and rebuilding of worn, damaged, cracked and corroded metal parts.
Typical applicati*** are corroded tanks, pump housings, impellers, valves, pipes, flange faces, roller bearing seats, worn shafts, hydraulic rams and heat exchangers. Wencon Cream is also excellent as a filling compound.
Wencon Cream exhibits many of the characteristics of metals, which together with outstanding adhesion to all metllic surfaces makes the repair compound highly suitable for repair of corroded and worn metals.
Wencon Cream is non conducting and can therefore not corrode or bi-metallic corrode. After curing the compound is resistant to oil, water, saltwater and most diluted acids and a range of solvents. Heat resistance ranges from 60° C in corrosive and he***y load environments and up to 250° C when applied as a filling compound.
Wencon Cream can be machined, drilled and worked like metal after curing. The compound has a paste c***istency and is easily applied by spatula also to vertical surfaces.
Wencon products are designed to be simple to use and cost effective. Easy mixing ratios (1:1 by volume) reduce waste to a minimum and high specific volumes give high coverage rates.
Product numbers:
No. 1010 Wencon Cream, 1 kg unit IMPA no. 812335 ISSA no. 75.553.20
|
