|
The high performance coating product for repair and protection in high temperature and aggressive environments
- High heat resistance
- Good chemical resistance
- Excellent mechanical wear properties
- Strong adhesion to all surfaces
- Fully machinable
Wencon Hi-Temp is a high performance two-component, liquid epoxy coating developed for applicati*** in high load areas. It provides a ***ooth non porous surface, which is resistant to high temperatures, strong chemical aggression and wear as well as bi-metallic corrosion.
Typical applicati*** are coating of surfaces rebuild after deterioration including repair of lining on inert gas systems, fresh water generators, hot pipes and heating coils, protection of tanks, pumps and valves against chemical and mechanical aggression, corrosion and bi-metallic corrosion.
Wencon Hi-Temp has been developed for use in marine, offshore and industry and is suitable for a wide range of applicati*** where high performance characteristics are required.
Wencon Hi-Temp offers resistance to oil, water, saltwater and wide range of acids and alkalis as well as a range of solvents. Heat resistance ranges from 160° C in corrosive and he***y load environments and up to 300° C when applied as a filling compound.
Wencon Hi-Temp is a double coat system and is c***equently supplied in two different colours, yellow and green. The product is liquid and is applied by brush, roller or spatula.
The Wencon products are designed to be simple to use and cost effective. Easy mixing ratio (1:2 by volume) reduce waste to a minimum and high specific volumes give high coverage rates.
Product numbers:
No. 1050 Wencon Hi-Temp, yellow, 500 g unit IMPA no. 812345 ISSA no. 75.553.12
No. 1060 Wencon Hi-Temp, green, 500 g unit IMPA no. 812346 ISSA no. 75.553.13
|
