|
The high temperature resistant cold weld exhaust repair product
- Resists temperatures up to 1300° C (2400° F)
- Resists direct flame contact
- Repairs cracks, fills holes and pits
- Quick cure when heated
- One component compound – no mixing, just stir
Wencon Exhaust Repair is a one component steel cold weld product that can be used to repair cracks and holes in equipment that is exposed to temperatures up to 1300° C.
Typical applicati*** include engine heads, blocks and manifolds, as well as furnaces and boilers. Wencon Exhaust Repair is especially valuable in areas and situati*** where traditional heat welding cannot be accomplished.
Wencon Exhaust Repair cures to 95% at room temperature within three hours of application. 100% cure can be obtained within 24 hours or in only 15 minutes when heat is applied.
Wencon Exhaust Repair can be grinded when cured. The compound has good adhesion on all metal surfaces. Wencon Exhaust Repair will not rust or oxidize and is resistant to chemicals.
The Wencon Exhaust Repair Kit contains:
- Wencon Exhaust Repair Compound, 2 x 250 g
- Reinforcement metal mesh, 10 x 50 cm
- Spatula
- Application data sheet
Note:
It is important to note, that this product is designed only for external emergency repairs of cracks and leaks.
Product numbers:
No. 1070 Wencon Exhaust Repair Kit, 2x250g IMPA no. 812340 ISSA no. 75.553.25
|
